Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2025-07-01 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2023 |
| Nitrate | 1200 µg/L 12% of the EPA limit 10000 µg/L | 4/12 | SYR4 | 2012–2018 |
| Bromoform | 3.899 µg/L No EPA limit set
worst single sample: 4.17 µg/L | 3/9 | SYR4 | 2013–2019 |
| TTHM | 9.678 µg/L 12% of the EPA limit 80 µg/L
worst single sample: 9.77 µg/L | 3/3 | SYR4 | 2015–2019 |
| Bromodichloromethane | 2.47 µg/L No EPA limit set
worst single sample: 2.52 µg/L | 2/9 | SYR4 | 2013–2019 |
| Chloroform | 2.0355 µg/L No EPA limit set
worst single sample: 2.07 µg/L | 2/9 | SYR4 | 2013–2019 |
| Dibromochloromethane | 2.795 µg/L No EPA limit set
worst single sample: 2.8 µg/L | 2/9 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 1.245 µg/L No EPA limit set
worst single sample: 1.25 µg/L | 2/7 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 3.1925 µg/L 5.3% of the EPA limit 60 µg/L
worst single sample: 3.3 µg/L | 2/6 | SYR4 | 2013–2018 |
| Barium | 76.8 µg/L 3.8% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2013 |
| Copper | 1.44 µg/L 0.1% of the EPA limit 1300 µg/L | 1/1 | SYR4 | 2013 |
| Dibromoacetic Acid | 2.05 µg/L No EPA limit set | 1/7 | SYR4 | 2013–2019 |
| Fluoride | 469 µg/L 12% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2013 |
| Selenium | 1.09 µg/L 2.2% of the EPA limit 50 µg/L | 1/1 | SYR4 | 2013 |
59 contaminants tested, none detected
Utility contact
Frequently asked questions about Walla Walla University
Is Walla Walla University tap water safe to drink?
EPA monitoring detected 14 contaminants in Walla Walla University's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Walla Walla University's water?
EPA monitoring detected Lead, Nitrate, Bromoform, TTHM, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Walla Walla University serve?
Walla Walla University reports serving 1,273 people in Washington, per its EPA record.
Has Walla Walla University had any water quality violations?
The EPA has 34 violations on file for Walla Walla University, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.