Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2024-07-01 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0040 mg/L 27% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Nitrate | 2750 µg/L 28% of the EPA limit 10000 µg/L | 10/30 | SYR4 | 2012–2019 |
| Chloroform | 30.76 µg/L No EPA limit set
worst single sample: 36 µg/L | 9/15 | SYR4 | 2012–2019 |
| TTHM | 35.008 µg/L 44% of the EPA limit 80 µg/L
worst single sample: 40.48 µg/L | 9/9 | SYR4 | 2012–2019 |
| Bromodichloromethane | 3.9 µg/L No EPA limit set | 8/15 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 6.36 µg/L No EPA limit set
worst single sample: 6.6 µg/L | 7/10 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 15.53 µg/L 26% of the EPA limit 60 µg/L
worst single sample: 15.8 µg/L | 7/10 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 11.4 µg/L No EPA limit set
worst single sample: 12 µg/L | 7/10 | SYR4 | 2012–2019 |
| Dibromochloromethane | 0.6850 µg/L No EPA limit set
worst single sample: 0.7000 µg/L | 4/15 | SYR4 | 2012–2019 |
| Arsenic | 3.85 µg/L 39% of the EPA limit 10 µg/L
worst single sample: 4 µg/L | 3/3 | SYR4 | 2012–2015 |
| Lead | 1 µg/L 6.7% of the EPA limit 15 µg/L | 1/6 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 1690 µg/L 17% of the EPA limit 10000 µg/L | 1/3 | SYR4 | 2012–2015 |
93 contaminants tested, none detected
Utility contact
Frequently asked questions about Vinland
Is Vinland tap water safe to drink?
EPA monitoring detected 12 contaminants in Vinland's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Vinland's water?
EPA monitoring detected Lead, Nitrate, Chloroform, TTHM, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Vinland serve?
Vinland reports serving 4,801 people in Washington, per its EPA record.
Has Vinland had any water quality violations?
The EPA has 28 violations on file for Vinland, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.