← Washington

Tap water quality report

Seabold Heights

EPA monitoring tested this supplier for 72 contaminants and detected 12. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

72
contaminants tested
12
detected
36
people served
9
health-based violations
Water source
Ground water
Ownership
Private
Counties served
Kitsap

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

9
health-based violations
32
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Archived 1992-09-01 → 1992-09-30
MCL Health-based Archived 1992-09-01 → 1992-09-30
MCL Health-based Archived 1992-09-01 → 1992-09-30
MCL Health-based Archived 1992-07-01 → 1992-07-31
MCL Health-based Archived 1992-07-01 → 1992-07-31
MCL Health-based Archived 1992-07-01 → 1992-07-31
MCL Health-based Archived 1992-04-01 → 1992-04-30
MCL Health-based Archived 1992-04-01 → 1992-04-30
MCL Health-based Archived 1992-04-01 → 1992-04-30
MR Monitoring Archived 1998-01-01 → 1999-05-01

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Chloroform
7.46 µg/L
No EPA limit set
worst single sample: 7.7 µg/L
9/9 SYR4 2012–2018
TTHM
11.1 µg/L 14%
of the EPA limit 80 µg/L
worst single sample: 11.7 µg/L
9/9 SYR4 2012–2018
Bromodichloromethane
2.89 µg/L
No EPA limit set
worst single sample: 3.1 µg/L
8/9 SYR4 2012–2018
Dibromochloromethane
0.8400 µg/L
No EPA limit set
worst single sample: 0.9000 µg/L
7/9 SYR4 2012–2018
Lead
0.00050 mg/L 3.3%
of the EPA limit 0.0150 mg/L
7/7 LCR 2023
Dichloroacetic Acid
2.775 µg/L
No EPA limit set
worst single sample: 2.8 µg/L
6/6 SYR4 2012–2017
Total Haloacetic Acids (HAA5)
4.775 µg/L 8%
of the EPA limit 60 µg/L
worst single sample: 4.8 µg/L
6/6 SYR4 2012–2017
Arsenic
1.785 µg/L 18%
of the EPA limit 10 µg/L
worst single sample: 1.8 µg/L
4/4 SYR4 2013–2016
Trichloroacetic Acid
2.085 µg/L
No EPA limit set
worst single sample: 2.1 µg/L
4/4 SYR4 2012–2017
Nitrate
210 µg/L 2.1%
of the EPA limit 10000 µg/L
2/26 SYR4 2012–2019
Copper
70 µg/L 5.4%
of the EPA limit 1300 µg/L
1/4 SYR4 2013–2016
Nitrate-Nitrite
210 µg/L 2.1%
of the EPA limit 10000 µg/L
1/4 SYR4 2013–2016
60 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalAtrazineBhc-GammaBariumBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebEthylene DibromideEndrinEthylbenzeneFluorideHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoLeadMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNitritePentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
Kevin Odegard

Frequently asked questions about Seabold Heights

Is Seabold Heights tap water safe to drink?

EPA monitoring detected 12 contaminants in Seabold Heights's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Seabold Heights's water?

EPA monitoring detected Chloroform, TTHM, Bromodichloromethane, Dibromochloromethane, Lead, and others. The full list with the level and data source for each is above.

How many people does Seabold Heights serve?

Seabold Heights reports serving 36 people in Washington, per its EPA record.

Has Seabold Heights had any water quality violations?

The EPA has 32 violations on file for Seabold Heights, of which 9 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.