Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2006-07-01 → 2006-07-31 |
| MCL | Health-based | Archived | 1992-06-01 → 1992-06-30 |
| MCL | Health-based | Archived | 1992-04-01 → 1992-04-30 |
| MCL | Health-based | Archived | 1992-04-01 → 1992-04-30 |
| MCL | Health-based | Archived | 1992-04-01 → 1992-04-30 |
| MCL | Health-based | Archived | 1992-03-01 → 1992-03-31 |
| MCL | Health-based | Archived | 1992-03-01 → 1992-03-31 |
| MCL | Health-based | Archived | 1992-03-01 → 1992-03-31 |
| MON | Monitoring | Resolved | 2021-12-01 → 2021-12-31 |
| MON | Monitoring | Resolved | 2017-01-01 → 2017-01-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 1000 µg/L 10% of the EPA limit 10000 µg/L | 18/52 | SYR4 | 2012–2019 |
| Lead | 0.0015 mg/L 10% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| Chloroform | 5.9 µg/L No EPA limit set
worst single sample: 6.3 µg/L | 6/9 | SYR4 | 2012–2018 |
| TTHM | 7.175 µg/L 9% of the EPA limit 80 µg/L
worst single sample: 8 µg/L | 6/6 | SYR4 | 2012–2017 |
| Bromodichloromethane | 1.56 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 5/9 | SYR4 | 2012–2018 |
| Dichloroacetic Acid | 2.968 µg/L No EPA limit set
worst single sample: 3.1 µg/L | 3/3 | SYR4 | 2013–2017 |
| Total Haloacetic Acids (HAA5) | 7.212 µg/L 12% of the EPA limit 60 µg/L
worst single sample: 7.6 µg/L | 3/3 | SYR4 | 2013–2017 |
| Trichloroacetic Acid | 4.244 µg/L No EPA limit set
worst single sample: 4.5 µg/L | 3/3 | SYR4 | 2013–2017 |
| Barium | 6.8 µg/L 0.3% of the EPA limit 2000 µg/L
worst single sample: 7 µg/L | 2/3 | SYR4 | 2017–2019 |
| Chromium | 3.85 µg/L 3.9% of the EPA limit 100 µg/L
worst single sample: 4 µg/L | 2/3 | SYR4 | 2017–2019 |
| Nitrate-Nitrite | 918 µg/L 9.2% of the EPA limit 10000 µg/L
worst single sample: 920 µg/L | 2/5 | SYR4 | 2017–2019 |
| Lead | 4 µg/L 27% of the EPA limit 15 µg/L | 1/3 | SYR4 | 2017–2019 |
| Nitrite | 10 µg/L 1% of the EPA limit 1000 µg/L | 1/4 | SYR4 | 2017–2019 |
60 contaminants tested, none detected
Utility contact
Frequently asked questions about Rustlewood
Is Rustlewood tap water safe to drink?
EPA monitoring detected 13 contaminants in Rustlewood's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Rustlewood's water?
EPA monitoring detected Nitrate, Lead, Chloroform, TTHM, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Rustlewood serve?
Rustlewood reports serving 322 people in Washington, per its EPA record.
Has Rustlewood had any water quality violations?
The EPA has 32 violations on file for Rustlewood, of which 8 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.