Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MON | Monitoring | Resolved | 2023-02-01 → 2023-02-28 |
| Other | Monitoring | Resolved | 2010-07-01 |
| MR | Monitoring | Resolved | 2008-01-01 → 2010-12-31 |
| MR | Monitoring | Resolved | 2008-01-01 → 2010-12-31 |
| MR | Monitoring | Resolved | 2008-01-01 → 2010-12-31 |
| MR | Monitoring | Resolved | 2008-01-01 → 2010-12-31 |
| MR | Monitoring | Resolved | 2008-01-01 → 2010-12-31 |
| MR | Monitoring | Resolved | 2008-01-01 → 2010-12-31 |
| MR | Monitoring | Resolved | 2008-01-01 → 2010-12-31 |
| MR | Monitoring | Resolved | 2008-01-01 → 2010-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 320 µg/L 3.2% of the EPA limit 10000 µg/L | 20/56 | SYR4 | 2012–2019 |
| Lead | 0.0021 mg/L 14% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2023 |
| Chloroform | 1.055 µg/L No EPA limit set
worst single sample: 1.1 µg/L | 4/17 | SYR4 | 2012–2019 |
| TTHM | 2.403 µg/L 3% of the EPA limit 80 µg/L
worst single sample: 2.58 µg/L | 4/4 | SYR4 | 2013–2017 |
| Arsenic | 1.95 µg/L 20% of the EPA limit 10 µg/L
worst single sample: 2 µg/L | 3/5 | SYR4 | 2013–2017 |
| Barium | 23.6 µg/L 1.2% of the EPA limit 2000 µg/L
worst single sample: 24 µg/L | 3/5 | SYR4 | 2013–2017 |
| Bromodichloromethane | 0.7800 µg/L No EPA limit set
worst single sample: 0.8000 µg/L | 3/11 | SYR4 | 2012–2019 |
| Chromium | 2.9 µg/L 2.9% of the EPA limit 100 µg/L
worst single sample: 3 µg/L | 3/5 | SYR4 | 2013–2017 |
| Fluoride | 170 µg/L 4.3% of the EPA limit 4000 µg/L | 3/5 | SYR4 | 2013–2017 |
| Dichloroacetic Acid | 6.89 µg/L No EPA limit set
worst single sample: 6.9 µg/L | 2/10 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 20.89 µg/L 35% of the EPA limit 60 µg/L
worst single sample: 20.9 µg/L | 2/10 | SYR4 | 2013–2019 |
| Copper | 5 µg/L 0.4% of the EPA limit 1300 µg/L | 1/5 | SYR4 | 2013–2017 |
| Dibromochloromethane | 0.6800 µg/L No EPA limit set | 1/11 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 14 µg/L No EPA limit set | 1/9 | SYR4 | 2013–2019 |
88 contaminants tested, none detected
Utility contact
Frequently asked questions about Ridgefield Public Works
Is Ridgefield Public Works tap water safe to drink?
EPA monitoring detected 14 contaminants in Ridgefield Public Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Ridgefield Public Works's water?
EPA monitoring detected Nitrate, Lead, Chloroform, TTHM, Arsenic, and others. The full list with the level and data source for each is above.
How many people does Ridgefield Public Works serve?
Ridgefield Public Works reports serving 21,225 people in Washington, per its EPA record.
Has Ridgefield Public Works had any water quality violations?
The EPA has 1376 violations on file for Ridgefield Public Works, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.