Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 1997-01-01 → 1997-01-31 |
| MCL | Health-based | Archived | 1997-01-01 → 1997-01-31 |
| MCL | Health-based | Archived | 1997-01-01 → 1997-01-31 |
| MCL | Health-based | Archived | 1996-10-01 → 1996-10-31 |
| MCL | Health-based | Archived | 1996-10-01 → 1996-10-31 |
| MCL | Health-based | Archived | 1996-10-01 → 1996-10-31 |
| MCL | Health-based | Archived | 1995-12-01 → 1995-12-31 |
| MR | Monitoring | Unaddressed | 2023-01-01 |
| MR | Monitoring | Resolved | 2014-01-01 → 2014-12-31 |
| MR | Monitoring | Resolved | 2014-01-01 → 2014-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 2000 µg/L 20% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 0.0019 mg/L 13% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2025 |
| Nitrate-Nitrite | 1860 µg/L 19% of the EPA limit 10000 µg/L
worst single sample: 2000 µg/L | 8/8 | SYR4 | 2012–2019 |
| Chloroform | 2.2685 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 4/5 | SYR4 | 2012–2018 |
| Bromodichloromethane | 7.691 µg/L No EPA limit set
worst single sample: 7.7 µg/L | 3/4 | SYR4 | 2013–2018 |
| Bromoform | 16.34 µg/L No EPA limit set
worst single sample: 16.6 µg/L | 3/4 | SYR4 | 2013–2018 |
| Dibromochloromethane | 16.92 µg/L No EPA limit set
worst single sample: 17.3 µg/L | 3/4 | SYR4 | 2013–2018 |
| TTHM | 39.924 µg/L 50% of the EPA limit 80 µg/L
worst single sample: 40.9 µg/L | 3/3 | SYR4 | 2013–2017 |
| Arsenic | 4.195 µg/L 42% of the EPA limit 10 µg/L
worst single sample: 4.2 µg/L | 2/2 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 9.605 µg/L No EPA limit set
worst single sample: 10 µg/L | 2/3 | SYR4 | 2013–2017 |
| Total Haloacetic Acids (HAA5) | 12.4175 µg/L 21% of the EPA limit 60 µg/L
worst single sample: 12.93 µg/L | 2/3 | SYR4 | 2013–2017 |
| Trichloroacetic Acid | 0.8270 µg/L No EPA limit set
worst single sample: 0.8400 µg/L | 2/3 | SYR4 | 2013–2017 |
| Dichloroacetic Acid | 2.09 µg/L No EPA limit set | 1/3 | SYR4 | 2013–2017 |
44 contaminants tested, none detected
Utility contact
Frequently asked questions about Priest Point Beach Water Inc
Is Priest Point Beach Water Inc tap water safe to drink?
EPA monitoring detected 13 contaminants in Priest Point Beach Water Inc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Priest Point Beach Water Inc's water?
EPA monitoring detected Nitrate, Lead, Nitrate-Nitrite, Chloroform, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Priest Point Beach Water Inc serve?
Priest Point Beach Water Inc reports serving 624 people in Washington, per its EPA record.
Has Priest Point Beach Water Inc had any water quality violations?
The EPA has 61 violations on file for Priest Point Beach Water Inc, of which 7 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.