Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2007-11-01 → 2007-11-30 |
| MCL | Health-based | Archived | 2004-07-01 → 2004-07-31 |
| MCL | Health-based | Archived | 1995-10-01 → 1995-10-31 |
| MCL | Health-based | Archived | 1995-09-01 → 1995-09-30 |
| MCL | Health-based | Archived | 1984-10-01 → 1985-09-30 |
| MCL | Health-based | Archived | 1984-08-01 → 1984-09-30 |
| MR | Monitoring | Resolved | 2012-01-01 → 2012-12-31 |
| MR | Monitoring | Resolved | 2012-01-01 → 2012-12-31 |
| MR | Monitoring | Resolved | 2008-01-01 → 2008-03-31 |
| MR | Monitoring | Resolved | 2008-01-01 → 2008-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 9445 µg/L 94% of the EPA limit 10000 µg/L
worst single sample: 9900 µg/L | 72/72 | SYR4 | 2012–2019 |
| TTHM | 10.44 µg/L 13% of the EPA limit 80 µg/L
worst single sample: 13.4 µg/L | 17/17 | SYR4 | 2012–2019 |
| Bromoform | 4.2 µg/L No EPA limit set
worst single sample: 5.4 µg/L | 16/19 | SYR4 | 2012–2019 |
| Dibromochloromethane | 4.4 µg/L No EPA limit set
worst single sample: 5.3 µg/L | 16/19 | SYR4 | 2012–2019 |
| Bromodichloromethane | 1.775 µg/L No EPA limit set
worst single sample: 2 µg/L | 10/19 | SYR4 | 2012–2019 |
| Lead | 0.0018 mg/L 12% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2025 |
| Chloroform | 0.6750 µg/L No EPA limit set
worst single sample: 0.7000 µg/L | 6/18 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 3.76 µg/L 6.3% of the EPA limit 60 µg/L
worst single sample: 4.3 µg/L | 5/12 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.585 µg/L No EPA limit set
worst single sample: 1.6 µg/L | 4/13 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 5330 µg/L 53% of the EPA limit 10000 µg/L
worst single sample: 5900 µg/L | 4/4 | SYR4 | 2013–2017 |
| 1,2-Dichloropropane | 0.7800 µg/L 16% of the EPA limit 5 µg/L
worst single sample: 0.8000 µg/L | 3/5 | SYR4 | 2016–2019 |
| Trichloroacetic Acid | 4.3 µg/L No EPA limit set | 1/14 | SYR4 | 2012–2019 |
62 contaminants tested, none detected
Utility contact
Frequently asked questions about Pole Road Water Association
Is Pole Road Water Association tap water safe to drink?
EPA monitoring detected 12 contaminants in Pole Road Water Association's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Pole Road Water Association's water?
EPA monitoring detected Nitrate, TTHM, Bromoform, Dibromochloromethane, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Pole Road Water Association serve?
Pole Road Water Association reports serving 1,960 people in Washington, per its EPA record.
Has Pole Road Water Association had any water quality violations?
The EPA has 115 violations on file for Pole Road Water Association, of which 6 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.