Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2017-10-01 → 2017-12-31 |
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2017-01-01 → 2017-03-31 |
| MCL | Health-based | Resolved | 2016-10-01 → 2016-12-31 |
| MR | Monitoring | Resolved | 2008-10-01 → 2008-12-31 |
| MR | Monitoring | Resolved | 2008-10-01 → 2008-12-31 |
| MR | Monitoring | Resolved | 2008-10-01 → 2008-12-31 |
| MR | Monitoring | Resolved | 2008-10-01 → 2008-12-31 |
| MR | Monitoring | Resolved | 2008-01-01 → 2010-12-31 |
| MR | Monitoring | Archived | 1998-05-01 → 1998-05-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0085 mg/L 57% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2024 |
| Chloroform | 20.64 µg/L No EPA limit set
worst single sample: 22.2 µg/L | 7/8 | SYR4 | 2013–2018 |
| Bromodichloromethane | 4.4715 µg/L No EPA limit set
worst single sample: 4.5 µg/L | 4/4 | SYR4 | 2013–2018 |
| Dichloroacetic Acid | 7.425 µg/L No EPA limit set
worst single sample: 7.5 µg/L | 4/4 | SYR4 | 2013–2018 |
| TTHM | 24.0865 µg/L 30% of the EPA limit 80 µg/L
worst single sample: 25 µg/L | 4/4 | SYR4 | 2013–2018 |
| Total Haloacetic Acids (HAA5) | 18.72 µg/L 31% of the EPA limit 60 µg/L
worst single sample: 18.9 µg/L | 4/4 | SYR4 | 2013–2018 |
| Trichloroacetic Acid | 11.295 µg/L No EPA limit set
worst single sample: 11.4 µg/L | 4/4 | SYR4 | 2013–2018 |
| Arsenic | 19.5 µg/L 195% of the EPA limit, at the 95th percentile of samples — 10 µg/L
worst single sample: 20 µg/L | 3/3 | SYR4 | 2015–2016 |
| Barium | 11.5 µg/L 0.6% of the EPA limit 2000 µg/L
worst single sample: 12 µg/L | 2/3 | SYR4 | 2015–2016 |
| Dibromochloromethane | 1.65 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 2/4 | SYR4 | 2013–2018 |
| Copper | 2 µg/L 0.2% of the EPA limit 1300 µg/L | 1/3 | SYR4 | 2015–2016 |
| Chromium | 2 µg/L 2% of the EPA limit 100 µg/L | 1/3 | SYR4 | 2015–2016 |
60 contaminants tested, none detected
Utility contact
Frequently asked questions about Hartstene Pointe
Is Hartstene Pointe tap water safe to drink?
EPA monitoring detected 12 contaminants in Hartstene Pointe's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Hartstene Pointe's water?
EPA monitoring detected Lead, Chloroform, Bromodichloromethane, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.
How many people does Hartstene Pointe serve?
Hartstene Pointe reports serving 460 people in Washington, per its EPA record.
Has Hartstene Pointe had any water quality violations?
The EPA has 20 violations on file for Hartstene Pointe, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.