Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2025-10-30 |
| TT | Health-based | Resolved | 2025-10-29 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-06-30 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-06-30 |
| MCL | Health-based | Resolved | 2011-10-01 → 2011-12-31 |
| MCL | Health-based | Resolved | 2011-10-01 → 2011-12-31 |
| MON | Monitoring | Resolved | 2024-04-01 → 2024-04-30 |
| MON | Monitoring | Resolved | 2020-07-01 → 2020-07-31 |
| MR | Monitoring | Resolved | 2013-10-01 → 2013-12-31 |
| Other | Monitoring | Resolved | 2013-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.1046 mg/L 697% above the EPA limit of 0.0150 mg/L | 11/11 | LCR | 2024 |
| Bromodichloromethane | 5.29 µg/L No EPA limit set
worst single sample: 5.4 µg/L | 3/4 | SYR4 | 2012–2018 |
| Chloroform | 4.36 µg/L No EPA limit set
worst single sample: 4.5 µg/L | 3/4 | SYR4 | 2012–2018 |
| TTHM | 15.95 µg/L 20% of the EPA limit 80 µg/L
worst single sample: 16.1 µg/L | 3/3 | SYR4 | 2015–2018 |
| Bromoform | 1.845 µg/L No EPA limit set
worst single sample: 1.9 µg/L | 2/4 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 2.185 µg/L No EPA limit set
worst single sample: 2.2 µg/L | 2/2 | SYR4 | 2015–2018 |
| Dibromochloromethane | 5.395 µg/L No EPA limit set
worst single sample: 5.4 µg/L | 2/4 | SYR4 | 2012–2018 |
| Dichloroacetic Acid | 3.58 µg/L No EPA limit set
worst single sample: 3.7 µg/L | 2/2 | SYR4 | 2015–2018 |
| Nitrate | 110 µg/L 1.1% of the EPA limit 10000 µg/L | 2/6 | SYR4 | 2015–2019 |
| Total Haloacetic Acids (HAA5) | 8.51 µg/L 14% of the EPA limit 60 µg/L
worst single sample: 8.7 µg/L | 2/2 | SYR4 | 2015–2018 |
| Trichloroacetic Acid | 3.015 µg/L No EPA limit set
worst single sample: 3.1 µg/L | 2/2 | SYR4 | 2015–2018 |
| Arsenic | 2 µg/L 20% of the EPA limit 10 µg/L | 1/1 | SYR4 | 2015 |
| Barium | 11 µg/L 0.5% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2015 |
45 contaminants tested, none detected
Utility contact
Frequently asked questions about Parkwood
Is Parkwood tap water safe to drink?
EPA monitoring detected 13 contaminants in Parkwood's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Parkwood's water?
EPA monitoring detected Lead, Bromodichloromethane, Chloroform, TTHM, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Parkwood serve?
Parkwood reports serving 65 people in Idaho, per its EPA record.
Has Parkwood had any water quality violations?
The EPA has 57 violations on file for Parkwood, of which 6 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.