Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2000-09-01 → 2000-09-30 |
| MCL | Health-based | Archived | 2000-09-01 → 2000-09-30 |
| MCL | Health-based | Archived | 2000-09-01 → 2000-09-30 |
| MON | Monitoring | Resolved | 2018-07-01 → 2018-07-31 |
| Other | Monitoring | Resolved | 2012-07-01 |
| MR | Monitoring | Resolved | 2002-01-01 → 2004-12-31 |
| MR | Monitoring | Resolved | 2002-01-01 → 2004-12-31 |
| MR | Monitoring | Resolved | 2002-01-01 → 2004-12-31 |
| MR | Monitoring | Resolved | 2002-01-01 → 2004-12-31 |
| MR | Monitoring | Resolved | 2002-01-01 → 2004-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0017 mg/L 11% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2021 |
| Nitrate | 2200 µg/L 22% of the EPA limit 10000 µg/L | 10/10 | SYR4 | 2012–2016 |
| Nitrate-Nitrite | 2112 µg/L 21% of the EPA limit 10000 µg/L
worst single sample: 2200 µg/L | 5/5 | SYR4 | 2012–2016 |
| Chloroform | 0.8800 µg/L No EPA limit set
worst single sample: 0.9000 µg/L | 3/4 | SYR4 | 2013–2017 |
| TTHM | 2.47 µg/L 3.1% of the EPA limit 80 µg/L
worst single sample: 2.5 µg/L | 3/3 | SYR4 | 2013–2017 |
| Bromodichloromethane | 0.9950 µg/L No EPA limit set
worst single sample: 1 µg/L | 2/4 | SYR4 | 2013–2017 |
| Dibromochloromethane | 0.6000 µg/L No EPA limit set | 2/4 | SYR4 | 2013–2017 |
| Arsenic | 1.09 µg/L 11% of the EPA limit 10 µg/L | 1/1 | SYR4 | 2018 |
| Barium | 41.02 µg/L 2.1% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2018 |
| Copper | 1.37 µg/L 0.1% of the EPA limit 1300 µg/L | 1/1 | SYR4 | 2018 |
| Chromium | 1.65 µg/L 1.7% of the EPA limit 100 µg/L | 1/1 | SYR4 | 2018 |
| Fluoride | 60 µg/L 1.5% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2018 |
| Lead | 0.1000 µg/L 0.7% of the EPA limit 15 µg/L | 1/1 | SYR4 | 2018 |
| Selenium | 0.6200 µg/L 1.2% of the EPA limit 50 µg/L | 1/1 | SYR4 | 2018 |
| Thallium, Total | 0.6600 µg/L 33% of the EPA limit 2 µg/L | 1/1 | SYR4 | 2018 |
40 contaminants tested, none detected
Utility contact
Frequently asked questions about Chelan Co Pud - Dryden
Is Chelan Co Pud - Dryden tap water safe to drink?
EPA monitoring detected 15 contaminants in Chelan Co Pud - Dryden's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Chelan Co Pud - Dryden's water?
EPA monitoring detected Lead, Nitrate, Nitrate-Nitrite, Chloroform, TTHM, and others. The full list with the level and data source for each is above.
How many people does Chelan Co Pud - Dryden serve?
Chelan Co Pud - Dryden reports serving 163 people in Washington, per its EPA record.
Has Chelan Co Pud - Dryden had any water quality violations?
The EPA has 36 violations on file for Chelan Co Pud - Dryden, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.