Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2026-01-01 → 2026-03-31 |
| MCL | Health-based | Archived | 2025-10-01 → 2025-12-31 |
| MCL | Health-based | Archived | 2025-07-01 → 2025-09-30 |
| MCL | Health-based | Archived | 2025-04-01 → 2025-06-30 |
| MCL | Health-based | Archived | 2025-01-01 → 2025-03-31 |
| MCL | Health-based | Archived | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Archived | 2024-07-01 → 2024-09-30 |
| MCL | Health-based | Archived | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Archived | 2024-01-01 → 2024-03-31 |
| MCL | Health-based | Archived | 2023-10-01 → 2023-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0012 mg/L 8% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2022 |
| Chloroform | 39.31 µg/L No EPA limit set
worst single sample: 50.5 µg/L | 7/7 | SYR4 | 2012–2017 |
| TTHM | 47.19 µg/L 59% of the EPA limit 80 µg/L
worst single sample: 59.1 µg/L | 7/7 | SYR4 | 2012–2017 |
| Nitrate | 970 µg/L 9.7% of the EPA limit 10000 µg/L | 4/4 | SYR4 | 2016 |
| Bromodichloromethane | 7.34 µg/L No EPA limit set
worst single sample: 7.6 µg/L | 3/7 | SYR4 | 2012–2017 |
| Dibromochloromethane | 1.2 µg/L No EPA limit set | 3/7 | SYR4 | 2012–2017 |
| Arsenic | 2.8 µg/L 28% of the EPA limit 10 µg/L | 2/2 | SYR4 | 2016 |
| Dichloroacetic Acid | 6.595 µg/L No EPA limit set
worst single sample: 6.6 µg/L | 2/3 | SYR4 | 2012–2017 |
| Fluoride | 280 µg/L 7% of the EPA limit 4000 µg/L | 2/2 | SYR4 | 2016 |
| Nitrate-Nitrite | 970 µg/L 9.7% of the EPA limit 10000 µg/L | 2/2 | SYR4 | 2016 |
| Total Haloacetic Acids (HAA5) | 12.575 µg/L 21% of the EPA limit 60 µg/L
worst single sample: 12.7 µg/L | 2/3 | SYR4 | 2012–2017 |
| Trichloroacetic Acid | 5.985 µg/L No EPA limit set
worst single sample: 6.2 µg/L | 2/3 | SYR4 | 2012–2017 |
| Monochloroacetic Acid | 1.7 µg/L No EPA limit set | 1/3 | SYR4 | 2012–2017 |
42 contaminants tested, none detected
Utility contact
Frequently asked questions about Campbells Glen
Is Campbells Glen tap water safe to drink?
EPA monitoring detected 13 contaminants in Campbells Glen's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Campbells Glen's water?
EPA monitoring detected Lead, Chloroform, TTHM, Nitrate, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Campbells Glen serve?
Campbells Glen reports serving 62 people in Washington, per its EPA record.
Has Campbells Glen had any water quality violations?
The EPA has 211 violations on file for Campbells Glen, of which 55 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.