Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Archived | 2024-01-01 → 2024-03-31 |
| MCL | Health-based | Archived | 2023-10-01 → 2023-12-31 |
| MCL | Health-based | Archived | 2023-07-01 → 2023-09-30 |
| MCL | Health-based | Archived | 2023-04-01 → 2023-06-30 |
| MCL | Health-based | Archived | 2023-01-01 → 2023-03-31 |
| MCL | Health-based | Resolved | 2021-01-01 → 2021-03-31 |
| MCL | Health-based | Resolved | 2021-01-01 → 2021-03-31 |
| MCL | Health-based | Resolved | 2020-04-01 → 2020-06-30 |
| MCL | Health-based | Resolved | 2020-04-01 → 2020-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0195 mg/L 130% above the EPA limit of 0.0150 mg/L | 11/11 | LCR | 2022 |
| Bromodichloromethane | 5.78 µg/L No EPA limit set
worst single sample: 6.2 µg/L | 7/7 | SYR4 | 2014–2017 |
| Bromoform | 23.21 µg/L No EPA limit set
worst single sample: 24.2 µg/L | 7/7 | SYR4 | 2014–2017 |
| Dibromochloromethane | 17.18 µg/L No EPA limit set
worst single sample: 18.2 µg/L | 7/7 | SYR4 | 2014–2017 |
| TTHM | 43.84 µg/L 55% of the EPA limit 80 µg/L
worst single sample: 44.8 µg/L | 7/7 | SYR4 | 2014–2017 |
| Chloroform | 1.455 µg/L No EPA limit set
worst single sample: 1.5 µg/L | 4/7 | SYR4 | 2014–2017 |
| Dibromoacetic Acid | 7.915 µg/L No EPA limit set
worst single sample: 8.2 µg/L | 4/4 | SYR4 | 2014–2017 |
| Total Haloacetic Acids (HAA5) | 9.19 µg/L 15% of the EPA limit 60 µg/L
worst single sample: 9.4 µg/L | 4/4 | SYR4 | 2014–2017 |
| Nitrate | 2800 µg/L 28% of the EPA limit 10000 µg/L | 2/2 | SYR4 | 2017 |
| Trichloroacetic Acid | 1.195 µg/L No EPA limit set
worst single sample: 1.2 µg/L | 2/4 | SYR4 | 2014–2017 |
| Arsenic | 9.8 µg/L 98% of the EPA limit 10 µg/L | 1/1 | SYR4 | 2017 |
| Dichloroacetic Acid | 1 µg/L No EPA limit set | 1/4 | SYR4 | 2014–2017 |
| Monobromoacetic Acid | 1.4 µg/L No EPA limit set | 1/4 | SYR4 | 2014–2017 |
| Nitrate-Nitrite | 2900 µg/L 29% of the EPA limit 10000 µg/L | 1/1 | SYR4 | 2017 |
| Selenium | 2.2 µg/L 4.4% of the EPA limit 50 µg/L | 1/1 | SYR4 | 2017 |
40 contaminants tested, none detected
Utility contact
Frequently asked questions about Bonnie View Water
Is Bonnie View Water tap water safe to drink?
EPA monitoring detected 15 contaminants in Bonnie View Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bonnie View Water's water?
EPA monitoring detected Lead, Bromodichloromethane, Bromoform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Bonnie View Water serve?
Bonnie View Water reports serving 50 people in Washington, per its EPA record.
Has Bonnie View Water had any water quality violations?
The EPA has 44 violations on file for Bonnie View Water, of which 26 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.