Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2007-03-01 → 2007-03-31 |
| TT | Health-based | Resolved | 2007-03-01 → 2007-03-31 |
| TT | Health-based | Resolved | 2007-02-01 → 2007-02-28 |
| TT | Health-based | Resolved | 2007-02-01 → 2007-02-28 |
| TT | Health-based | Resolved | 2007-01-01 → 2007-01-31 |
| TT | Health-based | Resolved | 2007-01-01 → 2007-01-31 |
| TT | Health-based | Archived | 2005-08-01 → 2005-08-31 |
| MON | Monitoring | Resolved | 2018-07-01 → 2018-07-31 |
| Other | Monitoring | Resolved | 2012-07-01 |
| MR | Monitoring | Archived | 2008-04-01 → 2008-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 1110 µg/L 11% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 0.00070 mg/L 4.7% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2025 |
| Nitrate-Nitrite | 830 µg/L 8.3% of the EPA limit 10000 µg/L
worst single sample: 1110 µg/L | 8/8 | SYR4 | 2012–2019 |
| Chloroform | 2.295 µg/L No EPA limit set
worst single sample: 2.4 µg/L | 4/4 | SYR4 | 2013–2017 |
| TTHM | 3.265 µg/L 4.1% of the EPA limit 80 µg/L
worst single sample: 3.4 µg/L | 4/4 | SYR4 | 2013–2017 |
| Dichloroacetic Acid | 1.2 µg/L No EPA limit set | 3/3 | SYR4 | 2013–2017 |
| Total Haloacetic Acids (HAA5) | 2.19 µg/L 3.7% of the EPA limit 60 µg/L
worst single sample: 2.3 µg/L | 3/3 | SYR4 | 2013–2017 |
| Bromodichloromethane | 0.9950 µg/L No EPA limit set
worst single sample: 1 µg/L | 2/4 | SYR4 | 2013–2017 |
| Arsenic | 0.1000 µg/L 1% of the EPA limit 10 µg/L | 1/1 | SYR4 | 2013 |
| Barium | 5.36 µg/L 0.3% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2013 |
| Copper | 12.57 µg/L 1% of the EPA limit 1300 µg/L | 1/1 | SYR4 | 2013 |
| Fluoride | 300 µg/L 7.5% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2013 |
| Lead | 0.8700 µg/L 5.8% of the EPA limit 15 µg/L | 1/1 | SYR4 | 2013 |
| Thallium, Total | 0.5700 µg/L 28% of the EPA limit 2 µg/L | 1/1 | SYR4 | 2013 |
| Trichloroacetic Acid | 1.1 µg/L No EPA limit set | 1/3 | SYR4 | 2013–2017 |
40 contaminants tested, none detected
Utility contact
Frequently asked questions about Chelan Co Pud - Chelan Ridge
Is Chelan Co Pud - Chelan Ridge tap water safe to drink?
EPA monitoring detected 15 contaminants in Chelan Co Pud - Chelan Ridge's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Chelan Co Pud - Chelan Ridge's water?
EPA monitoring detected Nitrate, Lead, Nitrate-Nitrite, Chloroform, TTHM, and others. The full list with the level and data source for each is above.
How many people does Chelan Co Pud - Chelan Ridge serve?
Chelan Co Pud - Chelan Ridge reports serving 2,429 people in Washington, per its EPA record.
Has Chelan Co Pud - Chelan Ridge had any water quality violations?
The EPA has 31 violations on file for Chelan Co Pud - Chelan Ridge, of which 7 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.