Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2009-05-01 → 2009-05-31 |
| MCL | Health-based | Resolved | 2009-05-01 → 2009-05-31 |
| MCL | Health-based | Resolved | 2009-05-01 → 2009-05-31 |
| MCL | Health-based | Resolved | 2009-05-01 → 2009-05-31 |
| MR | Monitoring | Unaddressed | 2025-01-01 |
| MR | Monitoring | Unaddressed | 2025-01-01 |
| Other | Monitoring | Resolved | 2024-07-01 |
| Other | Monitoring | Resolved | 2024-07-01 |
| Other | Monitoring | Resolved | 2024-07-01 |
| MR | Monitoring | Resolved | 2023-07-01 → 2023-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 152 µg/L 12% of the EPA limit 1300 µg/L
worst single sample: 180 µg/L | 15/16 | SYR4 | 2012–2017 |
| Lead | 0.0050 mg/L 33% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2022 |
| Bromoform | 18.8 µg/L No EPA limit set
worst single sample: 19 µg/L | 5/7 | SYR4 | 2012–2018 |
| Bromodichloromethane | 1.865 µg/L No EPA limit set
worst single sample: 2 µg/L | 4/7 | SYR4 | 2012–2018 |
| Dibromochloromethane | 6.7 µg/L No EPA limit set
worst single sample: 7 µg/L | 4/7 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 3 µg/L No EPA limit set | 2/4 | SYR4 | 2012–2018 |
| TTHM | 27.8 µg/L 35% of the EPA limit 80 µg/L
worst single sample: 28 µg/L | 2/4 | SYR4 | 2012–2018 |
| Trichloroacetic Acid | 2.95 µg/L No EPA limit set
worst single sample: 3 µg/L | 2/4 | SYR4 | 2012–2018 |
| Barium | 30 µg/L 1.5% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2017 |
| Combined Radium (-226 And -228) | 0.7380 pCi/L 15% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2012 |
| Lead | 1 µg/L 6.7% of the EPA limit 15 µg/L | 1/16 | SYR4 | 2012–2017 |
| Total Haloacetic Acids (HAA5) | 6 µg/L 10% of the EPA limit 60 µg/L | 1/4 | SYR4 | 2012–2018 |
39 contaminants tested, none detected
Utility contact
Frequently asked questions about Rhodeside Acres
Is Rhodeside Acres tap water safe to drink?
EPA monitoring detected 12 contaminants in Rhodeside Acres's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Rhodeside Acres's water?
EPA monitoring detected Copper, Lead, Bromoform, Bromodichloromethane, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Rhodeside Acres serve?
Rhodeside Acres reports serving 65 people in Vermont, per its EPA record.
Has Rhodeside Acres had any water quality violations?
The EPA has 924 violations on file for Rhodeside Acres, of which 4 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.