Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2003-06-01 → 2003-06-30 |
| MCL | Health-based | Resolved | 2003-06-01 → 2003-06-30 |
| MCL | Health-based | Resolved | 2003-06-01 → 2003-06-30 |
| MCL | Health-based | Resolved | 2003-06-01 → 2003-06-30 |
| MCL | Health-based | Resolved | 2003-06-01 → 2003-06-30 |
| MCL | Health-based | Archived | 1999-04-01 → 1999-04-30 |
| MCL | Health-based | Resolved | 1999-04-01 → 1999-04-30 |
| MCL | Health-based | Resolved | 1999-04-01 → 1999-04-30 |
| MCL | Health-based | Resolved | 1999-04-01 → 1999-04-30 |
| MCL | Health-based | Resolved | 1999-04-01 → 1999-04-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 475 µg/L 37% of the EPA limit 1300 µg/L
worst single sample: 570 µg/L | 26/33 | SYR4 | 2012–2018 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 17/17 | LCR | 2025 |
| Bromodichloromethane | 2 µg/L No EPA limit set | 8/12 | SYR4 | 2013–2019 |
| Chloroform | 6.9 µg/L No EPA limit set
worst single sample: 9 µg/L | 8/12 | SYR4 | 2013–2019 |
| Dibromochloromethane | 1.75 µg/L No EPA limit set
worst single sample: 2 µg/L | 6/12 | SYR4 | 2013–2019 |
| TTHM | 10.5 µg/L 13% of the EPA limit 80 µg/L
worst single sample: 12 µg/L | 6/7 | SYR4 | 2013–2019 |
| Lead | 4 µg/L 27% of the EPA limit 15 µg/L | 5/33 | SYR4 | 2012–2018 |
| Arsenic | 6.9 µg/L 69% of the EPA limit 10 µg/L
worst single sample: 7 µg/L | 3/3 | SYR4 | 2013–2017 |
| Barium | 20 µg/L 1% of the EPA limit 2000 µg/L | 2/3 | SYR4 | 2013–2017 |
| Combined Radium (-226 And -228) | 1.17505 pCi/L 24% of the EPA limit 5 pCi/L
worst single sample: 1.179 pCi/L | 2/2 | SYR4 | 2012–2017 |
| Dichloroacetic Acid | 3 µg/L No EPA limit set | 1/7 | SYR4 | 2013–2019 |
| Gross Alpha, Excl. Radon And U | 2.4 pCi/L 16% of the EPA limit 15 pCi/L | 1/1 | SYR4 | 2017 |
| Styrene | 0.7000 µg/L 0.7% of the EPA limit 100 µg/L | 1/5 | SYR4 | 2014–2017 |
| Total Haloacetic Acids (HAA5) | 6 µg/L 10% of the EPA limit 60 µg/L | 1/7 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 3 µg/L No EPA limit set | 1/7 | SYR4 | 2013–2019 |
61 contaminants tested, none detected
Utility contact
Frequently asked questions about Canaan Fire District 1
Is Canaan Fire District 1 tap water safe to drink?
EPA monitoring detected 15 contaminants in Canaan Fire District 1's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Canaan Fire District 1's water?
EPA monitoring detected Copper, Lead, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Canaan Fire District 1 serve?
Canaan Fire District 1 reports serving 970 people in Vermont, per its EPA record.
Has Canaan Fire District 1 had any water quality violations?
The EPA has 237 violations on file for Canaan Fire District 1, of which 10 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.