Compliance record
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 216 µg/L 17% of the EPA limit 1300 µg/L
worst single sample: 356 µg/L | 109/110 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Lead | 19.185 µg/L 128% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 32 µg/L | 12/110 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 2500.5 µg/L 25% of the EPA limit 10000 µg/L
worst single sample: 2910 µg/L | 10/10 | SYR4 | 2012–2019 |
| Fluoride | 965 µg/L 24% of the EPA limit 4000 µg/L
worst single sample: 1000 µg/L | 8/9 | SYR4 | 2012–2018 |
| Chloroform | 38.05 µg/L No EPA limit set
worst single sample: 49.6 µg/L | 7/10 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 11.12 µg/L No EPA limit set
worst single sample: 13.4 µg/L | 7/10 | SYR4 | 2012–2019 |
| TTHM | 47.03 µg/L 59% of the EPA limit 80 µg/L
worst single sample: 59.9 µg/L | 7/10 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 14.88 µg/L 25% of the EPA limit 60 µg/L
worst single sample: 18.3 µg/L | 7/10 | SYR4 | 2012–2019 |
| Bromodichloromethane | 6.9425 µg/L No EPA limit set
worst single sample: 8.2 µg/L | 6/10 | SYR4 | 2012–2019 |
| Barium | 77.6 µg/L 3.9% of the EPA limit 2000 µg/L
worst single sample: 78 µg/L | 5/5 | SYR4 | 2012–2018 |
| Dibromochloromethane | 2.68 µg/L No EPA limit set
worst single sample: 2.8 µg/L | 5/10 | SYR4 | 2012–2019 |
| Nitrate | 1700 µg/L 17% of the EPA limit 10000 µg/L | 4/4 | SYR4 | 2014–2016 |
| Trichloroacetic Acid | 3.68 µg/L No EPA limit set
worst single sample: 4.1 µg/L | 4/10 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 1.32635 pCi/L 27% of the EPA limit 5 pCi/L
worst single sample: 1.38 pCi/L | 2/9 | SYR4 | 2012–2019 |
| Combined Uranium | 0.2750 µg/L 0.9% of the EPA limit 30 µg/L | 1/7 | SYR4 | 2013–2019 |
| Dichloromethane | 0.6300 µg/L 13% of the EPA limit 5 µg/L | 1/17 | SYR4 | 2012–2019 |
65 contaminants tested, none detected
Utility contact
Frequently asked questions about Selma Estates
Is Selma Estates tap water safe to drink?
EPA monitoring detected 17 contaminants in Selma Estates's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Selma Estates's water?
EPA monitoring detected Copper, Lead, Lead, Nitrate-Nitrite, Fluoride, and others. The full list with the level and data source for each is above.
How many people does Selma Estates serve?
Selma Estates reports serving 1,540 people in Virginia, per its EPA record.
Has Selma Estates had any water quality violations?
The EPA has no formal drinking-water violations on file for Selma Estates.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.