Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2021-01-01 → 2021-03-31 |
| MCL | Health-based | Resolved | 2021-01-01 → 2021-03-31 |
| MCL | Health-based | Resolved | 2021-01-01 → 2021-03-31 |
| MCL | Health-based | Resolved | 2021-01-01 → 2021-03-31 |
| MCL | Health-based | Archived | 2005-12-01 → 2005-12-31 |
| MCL | Health-based | Archived | 2005-12-01 → 2005-12-31 |
| MCL | Health-based | Archived | 2005-12-01 → 2005-12-31 |
| Other | Monitoring | Resolved | 2024-10-02 |
| Other | Monitoring | Resolved | 2024-10-02 |
| Other | Monitoring | Resolved | 2014-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 9.605 µg/L No EPA limit set
worst single sample: 10.4 µg/L | 32/32 | SYR4 | 2012–2019 |
| Chloroform | 84.545 µg/L No EPA limit set
worst single sample: 106 µg/L | 32/32 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 31.685 µg/L No EPA limit set
worst single sample: 32.5 µg/L | 32/32 | SYR4 | 2012–2019 |
| TTHM | 93.535 µg/L 117% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 116 µg/L | 32/32 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 69.485 µg/L 116% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 73.4 µg/L | 32/32 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 37.19 µg/L No EPA limit set
worst single sample: 44.2 µg/L | 32/32 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 3.6615 µg/L No EPA limit set
worst single sample: 4.18 µg/L | 28/32 | SYR4 | 2012–2019 |
| Dibromochloromethane | 0.9200 µg/L No EPA limit set
worst single sample: 0.9700 µg/L | 26/32 | SYR4 | 2012–2019 |
| Copper | 40.68 µg/L 3.1% of the EPA limit 1300 µg/L
worst single sample: 68 µg/L | 22/22 | SYR4 | 2014–2017 |
| Lead | 3.6 µg/L 24% of the EPA limit 15 µg/L
worst single sample: 14.6 µg/L | 21/22 | SYR4 | 2014–2017 |
| Lead | 0.0014 mg/L 9.3% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2023 |
| Monobromoacetic Acid | 4.632 µg/L No EPA limit set
worst single sample: 4.86 µg/L | 5/32 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.12 µg/L No EPA limit set | 1/32 | SYR4 | 2012–2019 |
1 contaminants tested, none detected
Utility contact
Frequently asked questions about Plum Creek
Is Plum Creek tap water safe to drink?
EPA monitoring detected 13 contaminants in Plum Creek's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Plum Creek's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Plum Creek serve?
Plum Creek reports serving 1,740 people in Virginia, per its EPA record.
Has Plum Creek had any water quality violations?
The EPA has 14 violations on file for Plum Creek, of which 7 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.