Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MR | Monitoring | Resolved | 2017-12-13 |
| MR | Monitoring | Resolved | 2017-12-13 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 8.4765 µg/L No EPA limit set
worst single sample: 10.6 µg/L | 32/32 | SYR4 | 2012–2019 |
| Chloroform | 73.66 µg/L No EPA limit set
worst single sample: 82.1 µg/L | 32/32 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 32.85 µg/L No EPA limit set
worst single sample: 36.9 µg/L | 32/32 | SYR4 | 2012–2019 |
| TTHM | 83.465 µg/L 104% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 90.12 µg/L | 32/32 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 78.57 µg/L 131% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 84.5 µg/L | 32/32 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 41.93 µg/L No EPA limit set
worst single sample: 46.9 µg/L | 32/32 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 3.661 µg/L No EPA limit set
worst single sample: 4.73 µg/L | 28/32 | SYR4 | 2012–2019 |
| Dibromochloromethane | 0.7860 µg/L No EPA limit set
worst single sample: 0.8900 µg/L | 23/32 | SYR4 | 2012–2019 |
| Copper | 144 µg/L 11% of the EPA limit 1300 µg/L | 20/20 | SYR4 | 2012–2018 |
| Lead | 0.0012 mg/L 8% of the EPA limit 0.0150 mg/L | 18/18 | LCR | 2024 |
| Lead | 11.1 µg/L 74% of the EPA limit 15 µg/L | 17/20 | SYR4 | 2012–2018 |
| Monobromoacetic Acid | 8.191 µg/L No EPA limit set
worst single sample: 8.68 µg/L | 4/32 | SYR4 | 2012–2019 |
2 contaminants tested, none detected
Utility contact
Frequently asked questions about Bethel Area
Is Bethel Area tap water safe to drink?
EPA monitoring detected 12 contaminants in Bethel Area's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bethel Area's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Bethel Area serve?
Bethel Area reports serving 1,247 people in Virginia, per its EPA record.
Has Bethel Area had any water quality violations?
The EPA has 12 violations on file for Bethel Area, of which 8 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.