Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2021-10-01 → 2021-12-31 |
| MR | Monitoring | Resolved | 2021-10-01 → 2021-12-31 |
| MR | Monitoring | Resolved | 2021-10-01 → 2021-12-31 |
| MR | Monitoring | Resolved | 2021-10-01 → 2021-12-31 |
| MR | Monitoring | Resolved | 2021-10-01 → 2021-12-31 |
| MR | Monitoring | Resolved | 2021-10-01 → 2021-12-31 |
| MON | Monitoring | Resolved | 2020-03-01 → 2020-03-31 |
| MON | Monitoring | Resolved | 2020-03-01 → 2020-03-31 |
| MON | Monitoring | Resolved | 2020-03-01 → 2020-03-31 |
| MR | Monitoring | Resolved | 2018-07-01 → 2018-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 430 µg/L 33% of the EPA limit 1300 µg/L
worst single sample: 946.6 µg/L | 61/61 | SYR4 | 2013–2019 |
| Lead | 4.295 µg/L 29% of the EPA limit 15 µg/L
worst single sample: 8.2 µg/L | 60/61 | SYR4 | 2013–2019 |
| Dibromochloromethane | 3.2 µg/L No EPA limit set
worst single sample: 4.8 µg/L | 51/52 | SYR4 | 2013–2019 |
| TTHM | 63.3 µg/L 79% of the EPA limit 80 µg/L
worst single sample: 76.2 µg/L | 51/52 | SYR4 | 2013–2019 |
| Bromodichloromethane | 12.76 µg/L No EPA limit set
worst single sample: 15.1 µg/L | 50/52 | SYR4 | 2013–2019 |
| Chloroform | 47.66 µg/L No EPA limit set
worst single sample: 58.3 µg/L | 49/52 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 14.88 µg/L No EPA limit set
worst single sample: 15.7 µg/L | 44/52 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 18.31 µg/L No EPA limit set
worst single sample: 19.8 µg/L | 43/52 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 32.5 µg/L 54% of the EPA limit 60 µg/L
worst single sample: 34.1 µg/L | 41/52 | SYR4 | 2013–2019 |
| Lead | 0.0018 mg/L 12% of the EPA limit 0.0150 mg/L | 21/21 | LCR | 2025 |
| Bromoform | 2.16 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 9/51 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.675 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 6/52 | SYR4 | 2013–2019 |
| Lithium | 11 µg/L No EPA limit set | 2/4 | UCMR-5 | 2024 |
31 contaminants tested, none detected
Utility contact
Frequently asked questions about Washington Terrace City Water
Is Washington Terrace City Water tap water safe to drink?
EPA monitoring detected 13 contaminants in Washington Terrace City Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Washington Terrace City Water's water?
EPA monitoring detected Copper, Lead, Dibromochloromethane, TTHM, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Washington Terrace City Water serve?
Washington Terrace City Water reports serving 9,260 people in Utah, per its EPA record.
Has Washington Terrace City Water had any water quality violations?
The EPA has 77 violations on file for Washington Terrace City Water, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.