Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2025-01-01 → 2025-06-30 |
| MR | Monitoring | Resolved | 2025-01-01 → 2025-06-30 |
| MR | Monitoring | Resolved | 2025-01-01 → 2025-06-30 |
| MR | Monitoring | Resolved | 2022-09-29 |
| MR | Monitoring | Resolved | 2022-09-29 |
| Other | Monitoring | Resolved | 2022-07-01 |
| Other | Monitoring | Resolved | 2022-07-01 |
| Other | Monitoring | Resolved | 2022-07-01 |
| Other | Monitoring | Resolved | 2019-10-04 |
| Other | Monitoring | Resolved | 2019-10-04 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 148 µg/L 11% of the EPA limit 1300 µg/L
worst single sample: 290 µg/L | 39/41 | SYR4 | 2016–2017 |
| Bromodichloromethane | 6.2 µg/L No EPA limit set | 14/14 | SYR4 | 2016–2019 |
| Bromoform | 5.04 µg/L No EPA limit set
worst single sample: 5.3 µg/L | 14/14 | SYR4 | 2016–2019 |
| Dibromochloromethane | 8.17 µg/L No EPA limit set
worst single sample: 8.3 µg/L | 14/14 | SYR4 | 2016–2019 |
| Chloroform | 3.33 µg/L No EPA limit set
worst single sample: 3.4 µg/L | 8/14 | SYR4 | 2016–2019 |
| Dibromoacetic Acid | 3.465 µg/L No EPA limit set
worst single sample: 3.5 µg/L | 8/8 | SYR4 | 2016–2019 |
| Dichloroacetic Acid | 2.5 µg/L No EPA limit set | 8/8 | SYR4 | 2016–2019 |
| Nitrate | 4910 µg/L 49% of the EPA limit 10000 µg/L | 8/8 | SYR4 | 2016–2019 |
| TTHM | 21.29 µg/L 27% of the EPA limit 80 µg/L
worst single sample: 21.5 µg/L | 8/8 | SYR4 | 2016–2019 |
| Total Haloacetic Acids (HAA5) | 5.965 µg/L 9.9% of the EPA limit 60 µg/L
worst single sample: 6 µg/L | 8/8 | SYR4 | 2016–2019 |
| Lead | 0.0015 mg/L 9.9% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2025 |
| Lead | 1.385 µg/L 9.2% of the EPA limit 15 µg/L
worst single sample: 1.4 µg/L | 4/41 | SYR4 | 2016–2017 |
| Barium | 43.615 µg/L 2.2% of the EPA limit 2000 µg/L
worst single sample: 43.7 µg/L | 2/2 | SYR4 | 2016–2019 |
| Fluoride | 259 µg/L 6.5% of the EPA limit 4000 µg/L
worst single sample: 260 µg/L | 2/2 | SYR4 | 2016–2019 |
| Toluene | 0.7000 µg/L 0.1% of the EPA limit 1000 µg/L | 1/6 | SYR4 | 2016–2019 |
62 contaminants tested, none detected
Utility contact
Frequently asked questions about City of Jarrell
Is City of Jarrell tap water safe to drink?
EPA monitoring detected 15 contaminants in City of Jarrell's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Jarrell's water?
EPA monitoring detected Copper, Bromodichloromethane, Bromoform, Dibromochloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does City of Jarrell serve?
City of Jarrell reports serving 3,450 people in Texas, per its EPA record.
Has City of Jarrell had any water quality violations?
The EPA has 14 violations on file for City of Jarrell, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.