Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2009-12-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-12-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-12-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-12-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-12-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2008-09-01 → 2008-09-30 |
| MCL | Health-based | Resolved | 2008-09-01 → 2008-09-30 |
| MCL | Health-based | Resolved | 2008-09-01 → 2008-09-30 |
| MR | Monitoring | Unaddressed | 2025-12-30 |
| Other | Monitoring | Resolved | 2016-02-08 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 23.225 µg/L 29% of the EPA limit 80 µg/L
worst single sample: 28.9 µg/L | 126/126 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 16.675 µg/L 28% of the EPA limit 60 µg/L
worst single sample: 23.1 µg/L | 126/126 | SYR4 | 2012–2019 |
| Chloroform | 11.44 µg/L No EPA limit set
worst single sample: 16.1 µg/L | 125/126 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 10.72 µg/L No EPA limit set
worst single sample: 15 µg/L | 125/126 | SYR4 | 2012–2019 |
| Bromodichloromethane | 7.904 µg/L No EPA limit set
worst single sample: 10.2 µg/L | 123/126 | SYR4 | 2012–2019 |
| Dibromochloromethane | 5.782 µg/L No EPA limit set
worst single sample: 7.2 µg/L | 103/126 | SYR4 | 2012–2019 |
| Copper | 537.8 µg/L 41% of the EPA limit 1300 µg/L
worst single sample: 674.3 µg/L | 91/91 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 4.77 µg/L No EPA limit set
worst single sample: 15.6 µg/L | 75/126 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 4.475 µg/L No EPA limit set
worst single sample: 5.3 µg/L | 58/126 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 4.54 µg/L No EPA limit set
worst single sample: 5.4 µg/L | 54/126 | SYR4 | 2012–2019 |
| Lead | 4.815 µg/L 32% of the EPA limit 15 µg/L
worst single sample: 6.2 µg/L | 42/91 | SYR4 | 2012–2019 |
| Bromoform | 1.805 µg/L No EPA limit set
worst single sample: 1.84 µg/L | 27/126 | SYR4 | 2012–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2025 |
| Monobromoacetic Acid | 2.3 µg/L No EPA limit set
worst single sample: 2.9 µg/L | 16/126 | SYR4 | 2012–2019 |
23 contaminants tested, none detected
Utility contact
Frequently asked questions about City of Haltom City
Is City of Haltom City tap water safe to drink?
EPA monitoring detected 21 contaminants in City of Haltom City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Haltom City's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Chloroform, Dichloroacetic Acid, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does City of Haltom City serve?
City of Haltom City reports serving 46,260 people in Texas, per its EPA record.
Has City of Haltom City had any water quality violations?
The EPA has 44 violations on file for City of Haltom City, of which 8 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.