← Texas

Tap water quality report

Wright City Wsc 2

EPA monitoring tested this supplier for 79 contaminants and detected 21. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

79
contaminants tested
21
detected
2,124
people served
241
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Smith

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

241
health-based violations
259
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Archived 2026-01-01 → 2026-03-31
MCL Health-based Archived 2026-01-01 → 2026-03-31
MCL Health-based Archived 2026-01-01 → 2026-03-31
MCL Health-based Archived 2026-01-01 → 2026-03-31
MCL Health-based Archived 2025-10-01 → 2025-12-31
MCL Health-based Archived 2025-10-01 → 2025-12-31
MCL Health-based Archived 2025-10-01 → 2025-12-31
MCL Health-based Archived 2025-10-01 → 2025-12-31
MCL Health-based Archived 2025-07-01 → 2025-09-30
MCL Health-based Archived 2025-07-01 → 2025-09-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Bromoform
8.916 µg/L
No EPA limit set
worst single sample: 9.67 µg/L
63/63 SYR4 2012–2019
Dibromochloromethane
36.885 µg/L
No EPA limit set
worst single sample: 41.1 µg/L
62/63 SYR4 2012–2019
Bromodichloromethane
38.4 µg/L
No EPA limit set
worst single sample: 42.6 µg/L
61/63 SYR4 2012–2019
Chloroform
31.9 µg/L
No EPA limit set
worst single sample: 34.2 µg/L
61/63 SYR4 2012–2019
Dichloroacetic Acid
10.76 µg/L
No EPA limit set
worst single sample: 14.6 µg/L
57/57 SYR4 2012–2019
TTHM
115.84 µg/L 145%
of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 127 µg/L
57/57 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
28.04 µg/L 47%
of the EPA limit 60 µg/L
worst single sample: 32.1 µg/L
57/57 SYR4 2012–2019
Trichloroacetic Acid
10.9 µg/L
No EPA limit set
worst single sample: 14.6 µg/L
57/57 SYR4 2012–2019
Dibromoacetic Acid
8.225 µg/L
No EPA limit set
worst single sample: 9.1 µg/L
56/57 SYR4 2012–2019
Lead
6.827 µg/L 46%
of the EPA limit 15 µg/L
worst single sample: 19.3 µg/L
32/32 SYR4 2012–2018
Copper
915 µg/L 70%
of the EPA limit 1300 µg/L
worst single sample: 1300 µg/L
31/32 SYR4 2012–2018
Monochloroacetic Acid
4.13 µg/L
No EPA limit set
worst single sample: 4.4 µg/L
23/57 SYR4 2012–2019
Nitrate
30.9 µg/L 0.3%
of the EPA limit 10000 µg/L
14/16 SYR4 2012–2019
Monobromoacetic Acid
1.2 µg/L
No EPA limit set
13/57 SYR4 2012–2019
Barium
15.9 µg/L 0.8%
of the EPA limit 2000 µg/L
worst single sample: 16 µg/L
3/3 SYR4 2012–2019
Fluoride
1294 µg/L 32%
of the EPA limit 4000 µg/L
worst single sample: 1300 µg/L
3/3 SYR4 2012–2018
Nitrate-Nitrite
29.68 µg/L 0.3%
of the EPA limit 10000 µg/L
worst single sample: 30.2 µg/L
3/3 SYR4 2013–2019
Lead
0.0020 mg/L 13%
of the EPA limit 0.0150 mg/L
2/2 LCR 2026
Chromium
1.54 µg/L 1.5%
of the EPA limit 100 µg/L
1/3 SYR4 2012–2019
Combined Radium (-226 And -228)
1 pCi/L 20%
of the EPA limit 5 pCi/L
1/1 SYR4 2012
Selenium
0.6050 µg/L 1.2%
of the EPA limit 50 µg/L
1/3 SYR4 2012–2019
58 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebEthylene DibromideEndrinEthylbenzeneGross Alpha, Excl. Radon And UGross Beta Particle ActivityHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNitriteOxamylPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
SEALE, CHARLES, A
Phone
903-859-1281
Email
[email protected]

Frequently asked questions about Wright City Wsc 2

Is Wright City Wsc 2 tap water safe to drink?

EPA monitoring detected 21 contaminants in Wright City Wsc 2's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Wright City Wsc 2's water?

EPA monitoring detected Bromoform, Dibromochloromethane, Bromodichloromethane, Chloroform, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.

How many people does Wright City Wsc 2 serve?

Wright City Wsc 2 reports serving 2,124 people in Texas, per its EPA record.

Has Wright City Wsc 2 had any water quality violations?

The EPA has 259 violations on file for Wright City Wsc 2, of which 241 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.