Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| MR | Monitoring | Resolved | 2026-04-01 |
| MR | Monitoring | Resolved | 2026-04-01 |
| Other | Monitoring | Resolved | 2026-01-04 |
| Other | Monitoring | Resolved | 2026-01-04 |
| Other | Monitoring | Resolved | 2025-10-26 |
| Other | Monitoring | Resolved | 2025-10-26 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 224.35 µg/L 17% of the EPA limit 1300 µg/L
worst single sample: 426 µg/L | 28/31 | SYR4 | 2013–2017 |
| Bromoform | 22.5765 µg/L No EPA limit set
worst single sample: 24 µg/L | 14/15 | SYR4 | 2012–2019 |
| Dibromochloromethane | 9.995 µg/L No EPA limit set
worst single sample: 11.1 µg/L | 14/15 | SYR4 | 2012–2019 |
| Nitrate | 90 µg/L 0.9% of the EPA limit 10000 µg/L | 14/16 | SYR4 | 2012–2019 |
| Lead | 9.565 µg/L 64% of the EPA limit 15 µg/L
worst single sample: 12.7 µg/L | 12/31 | SYR4 | 2013–2017 |
| Bromodichloromethane | 2.9 µg/L No EPA limit set
worst single sample: 3.4 µg/L | 11/15 | SYR4 | 2012–2019 |
| Lead | 0.0144 mg/L 96% of the EPA limit 0.0150 mg/L | 8/8 | LCR | 2025 |
| Dibromoacetic Acid | 5 µg/L No EPA limit set
worst single sample: 5.9 µg/L | 7/7 | SYR4 | 2013–2019 |
| TTHM | 33.51 µg/L 42% of the EPA limit 80 µg/L
worst single sample: 37.5 µg/L | 7/7 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 5 µg/L 8.3% of the EPA limit 60 µg/L
worst single sample: 5.9 µg/L | 7/7 | SYR4 | 2013–2019 |
| Fluoride | 863 µg/L 22% of the EPA limit 4000 µg/L
worst single sample: 870 µg/L | 3/3 | SYR4 | 2012–2018 |
| Nitrate-Nitrite | 77 µg/L 0.8% of the EPA limit 10000 µg/L
worst single sample: 80 µg/L | 3/3 | SYR4 | 2013–2019 |
| Barium | 30.6 µg/L 1.5% of the EPA limit 2000 µg/L
worst single sample: 30.7 µg/L | 2/2 | SYR4 | 2015–2018 |
| Selenium | 3.7 µg/L 7.4% of the EPA limit 50 µg/L | 1/2 | SYR4 | 2015–2018 |
64 contaminants tested, none detected
Utility contact
Frequently asked questions about Mcmullen County Tilden
Is Mcmullen County Tilden tap water safe to drink?
EPA monitoring detected 14 contaminants in Mcmullen County Tilden's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Mcmullen County Tilden's water?
EPA monitoring detected Copper, Bromoform, Dibromochloromethane, Nitrate, Lead, and others. The full list with the level and data source for each is above.
How many people does Mcmullen County Tilden serve?
Mcmullen County Tilden reports serving 618 people in Texas, per its EPA record.
Has Mcmullen County Tilden had any water quality violations?
The EPA has 167 violations on file for Mcmullen County Tilden, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.