Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2016-04-01 → 2016-06-30 |
| MR | Monitoring | Resolved | 2016-04-01 → 2016-06-30 |
| MR | Monitoring | Resolved | 2016-04-01 → 2016-06-30 |
| MR | Monitoring | Resolved | 2016-04-01 → 2016-06-30 |
| Other | Monitoring | Resolved | 2014-07-01 |
| Other | Monitoring | Resolved | 2014-07-01 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 708.77 µg/L 55% of the EPA limit 1300 µg/L
worst single sample: 934.6 µg/L | 59/60 | SYR4 | 2013–2019 |
| Bromodichloromethane | 17.84 µg/L No EPA limit set
worst single sample: 18.6 µg/L | 50/50 | SYR4 | 2012–2019 |
| Chloroform | 32.885 µg/L No EPA limit set
worst single sample: 36.2 µg/L | 50/50 | SYR4 | 2012–2019 |
| Dibromochloromethane | 9.4605 µg/L No EPA limit set
worst single sample: 10.1 µg/L | 50/50 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 14.055 µg/L No EPA limit set
worst single sample: 16.8 µg/L | 50/50 | SYR4 | 2012–2019 |
| TTHM | 60.255 µg/L 75% of the EPA limit 80 µg/L
worst single sample: 63.9 µg/L | 50/50 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 27.585 µg/L 46% of the EPA limit 60 µg/L
worst single sample: 30.2 µg/L | 50/50 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 6.955 µg/L No EPA limit set
worst single sample: 7.3 µg/L | 50/50 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 10.025 µg/L No EPA limit set
worst single sample: 13.8 µg/L | 28/50 | SYR4 | 2012–2019 |
| Lead | 6.471 µg/L 43% of the EPA limit 15 µg/L
worst single sample: 37.3 µg/L | 28/60 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 11.4 µg/L No EPA limit set
worst single sample: 12.4 µg/L | 21/50 | SYR4 | 2012–2019 |
| Lead | 0.00085 mg/L 5.6% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2026 |
| Monochloroacetic Acid | 5.73 µg/L No EPA limit set
worst single sample: 5.8 µg/L | 15/50 | SYR4 | 2012–2019 |
| Bromoform | 2.455 µg/L No EPA limit set
worst single sample: 2.73 µg/L | 12/50 | SYR4 | 2012–2019 |
25 contaminants tested, none detected
Utility contact
Frequently asked questions about Talty Sud
Is Talty Sud tap water safe to drink?
EPA monitoring detected 19 contaminants in Talty Sud's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Talty Sud's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Talty Sud serve?
Talty Sud reports serving 15,987 people in Texas, per its EPA record.
Has Talty Sud had any water quality violations?
The EPA has 6 violations on file for Talty Sud, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.