Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2015-12-30 |
| MR | Monitoring | Resolved | 2015-12-30 |
| MR | Monitoring | Resolved | 2011-06-01 → 2011-06-30 |
| MR | Monitoring | Resolved | 2011-06-01 → 2011-06-30 |
| MR | Monitoring | Resolved | 2011-06-01 → 2011-06-30 |
| MR | Monitoring | Resolved | 2011-06-01 → 2011-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 227 µg/L 2.3% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Copper | 105.5 µg/L 8.1% of the EPA limit 1300 µg/L
worst single sample: 110 µg/L | 10/11 | SYR4 | 2015–2018 |
| Lead | 0.0204 mg/L 136% above the EPA limit of 0.0150 mg/L | 6/6 | LCR | 2026 |
| Dibromochloromethane | 1.342 µg/L No EPA limit set
worst single sample: 1.36 µg/L | 3/8 | SYR4 | 2013–2019 |
| Fluoride | 661.2 µg/L 17% of the EPA limit 4000 µg/L
worst single sample: 678 µg/L | 3/3 | SYR4 | 2012–2018 |
| Barium | 25 µg/L 1.3% of the EPA limit 2000 µg/L | 2/2 | SYR4 | 2015–2018 |
| Bromoform | 1.524 µg/L No EPA limit set
worst single sample: 1.54 µg/L | 2/8 | SYR4 | 2013–2019 |
| Chromium | 2.465 µg/L 2.5% of the EPA limit 100 µg/L
worst single sample: 2.5 µg/L | 2/2 | SYR4 | 2015–2018 |
| Combined Radium (-226 And -228) | 1.475 pCi/L 30% of the EPA limit 5 pCi/L
worst single sample: 1.5 pCi/L | 2/2 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 225.35 µg/L 2.3% of the EPA limit 10000 µg/L
worst single sample: 227 µg/L | 2/2 | SYR4 | 2014–2019 |
| TTHM | 2.875 µg/L 3.6% of the EPA limit 80 µg/L
worst single sample: 2.9 µg/L | 2/3 | SYR4 | 2013–2019 |
| Di(2-ethylhexyl) Phthalate | 5.3 µg/L 88% of the EPA limit 6 µg/L | 1/2 | SYR4 | 2015–2018 |
| Lead | 1.3 µg/L 8.7% of the EPA limit 15 µg/L | 1/11 | SYR4 | 2015–2018 |
66 contaminants tested, none detected
Utility contact
Frequently asked questions about Sandy Beach Subdivision
Is Sandy Beach Subdivision tap water safe to drink?
EPA monitoring detected 13 contaminants in Sandy Beach Subdivision's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Sandy Beach Subdivision's water?
EPA monitoring detected Nitrate, Copper, Lead, Dibromochloromethane, Fluoride, and others. The full list with the level and data source for each is above.
How many people does Sandy Beach Subdivision serve?
Sandy Beach Subdivision reports serving 423 people in Texas, per its EPA record.
Has Sandy Beach Subdivision had any water quality violations?
The EPA has 6 violations on file for Sandy Beach Subdivision, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.