Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2009-06-01 → 2009-06-30 |
| MCL | Health-based | Resolved | 2009-06-01 → 2009-06-30 |
| MCL | Health-based | Resolved | 2009-06-01 → 2009-06-30 |
| MCL | Health-based | Resolved | 2009-06-01 → 2009-06-30 |
| MCL | Health-based | Resolved | 2009-06-01 → 2009-06-30 |
| MCL | Health-based | Resolved | 2009-06-01 → 2009-06-30 |
| MCL | Health-based | Resolved | 2009-06-01 → 2009-06-30 |
| MCL | Health-based | Resolved | 2003-07-01 → 2003-07-31 |
| MCL | Health-based | Resolved | 2003-07-01 → 2003-07-31 |
| MCL | Health-based | Resolved | 2003-07-01 → 2003-07-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 81.3 µg/L 0.8% of the EPA limit 10000 µg/L | 10/14 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 5/5 | LCR | 2024 |
| Barium | 15.845 µg/L 0.8% of the EPA limit 2000 µg/L
worst single sample: 16 µg/L | 2/2 | SYR4 | 2014–2017 |
| Bromoform | 2.4125 µg/L No EPA limit set
worst single sample: 2.44 µg/L | 2/8 | SYR4 | 2015–2019 |
| Copper | 7.68 µg/L 0.6% of the EPA limit 1300 µg/L
worst single sample: 7.8 µg/L | 2/2 | SYR4 | 2014–2017 |
| Dibromochloromethane | 1.8185 µg/L No EPA limit set
worst single sample: 1.84 µg/L | 2/8 | SYR4 | 2015–2019 |
| Fluoride | 4027 µg/L 101% of the EPA limit, at the 95th percentile of samples — 4000 µg/L
worst single sample: 4040 µg/L | 2/2 | SYR4 | 2016–2019 |
| Nitrate-Nitrite | 59 µg/L 0.6% of the EPA limit 10000 µg/L
worst single sample: 60 µg/L | 2/3 | SYR4 | 2012–2015 |
| Cyanide | 100 µg/L 50% of the EPA limit 200 µg/L | 1/2 | SYR4 | 2016–2019 |
| Chromium | 1.1 µg/L 1.1% of the EPA limit 100 µg/L | 1/2 | SYR4 | 2014–2017 |
| Combined Radium (-226 And -228) | 0.6800 pCi/L 14% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2014 |
| Gross Alpha, Excl. Radon And U | 7.1 pCi/L 47% of the EPA limit 15 pCi/L | 1/1 | SYR4 | 2014 |
| Lead | 1.3 µg/L 8.7% of the EPA limit 15 µg/L | 1/2 | SYR4 | 2014–2017 |
| TTHM | 3.73 µg/L 4.7% of the EPA limit 80 µg/L | 1/2 | SYR4 | 2016–2019 |
| Xylenes, Total | 0.5000 µg/L 0% of the EPA limit 10000 µg/L | 1/6 | SYR4 | 2015–2019 |
64 contaminants tested, none detected
Utility contact
Frequently asked questions about Beachview Acres Water Association
Is Beachview Acres Water Association tap water safe to drink?
EPA monitoring detected 15 contaminants in Beachview Acres Water Association's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Beachview Acres Water Association's water?
EPA monitoring detected Nitrate, Lead, Barium, Bromoform, Copper, and others. The full list with the level and data source for each is above.
How many people does Beachview Acres Water Association serve?
Beachview Acres Water Association reports serving 129 people in Texas, per its EPA record.
Has Beachview Acres Water Association had any water quality violations?
The EPA has 499 violations on file for Beachview Acres Water Association, of which 17 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.