Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 1992-02-01 → 1992-02-29 |
| Other | Monitoring | Resolved | 2025-07-01 |
| Other | Monitoring | Resolved | 2025-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 160 µg/L 12% of the EPA limit 1300 µg/L
worst single sample: 190 µg/L | 49/52 | SYR4 | 2015–2019 |
| Nitrate | 1813.5 µg/L 18% of the EPA limit 10000 µg/L
worst single sample: 1830 µg/L | 32/32 | SYR4 | 2012–2019 |
| Dibromochloromethane | 5.84 µg/L No EPA limit set
worst single sample: 6.6 µg/L | 20/20 | SYR4 | 2013–2019 |
| Bromodichloromethane | 4.63 µg/L No EPA limit set
worst single sample: 4.9 µg/L | 19/20 | SYR4 | 2013–2019 |
| Chloroform | 4.44 µg/L No EPA limit set
worst single sample: 4.8 µg/L | 19/20 | SYR4 | 2013–2019 |
| Bromoform | 3.76 µg/L No EPA limit set
worst single sample: 4 µg/L | 17/20 | SYR4 | 2013–2019 |
| Lead | 6.72 µg/L 45% of the EPA limit 15 µg/L
worst single sample: 7.6 µg/L | 12/52 | SYR4 | 2015–2019 |
| Dibromoacetic Acid | 1.6 µg/L No EPA limit set | 8/8 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 2.46 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 8/8 | SYR4 | 2013–2019 |
| Lead | 0.0033 mg/L 22% of the EPA limit 0.0150 mg/L | 8/8 | LCR | 2023 |
| TTHM | 16.89 µg/L 21% of the EPA limit 80 µg/L
worst single sample: 17.1 µg/L | 8/8 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 3.96 µg/L 6.6% of the EPA limit 60 µg/L
worst single sample: 4.1 µg/L | 8/8 | SYR4 | 2013–2019 |
| Xylenes, Total | 1.14 µg/L 0% of the EPA limit 10000 µg/L
worst single sample: 1.2 µg/L | 7/12 | SYR4 | 2015–2019 |
| Nitrate-Nitrite | 1775 µg/L 18% of the EPA limit 10000 µg/L
worst single sample: 1800 µg/L | 6/6 | SYR4 | 2012–2015 |
| Barium | 58.09 µg/L 2.9% of the EPA limit 2000 µg/L
worst single sample: 58.3 µg/L | 4/4 | SYR4 | 2015–2018 |
| Fluoride | 468.5 µg/L 12% of the EPA limit 4000 µg/L
worst single sample: 470 µg/L | 4/4 | SYR4 | 2014–2017 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 2/2 | SYR4 | 2015 |
62 contaminants tested, none detected
Utility contact
Frequently asked questions about Cimarron Park Water
Is Cimarron Park Water tap water safe to drink?
EPA monitoring detected 17 contaminants in Cimarron Park Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Cimarron Park Water's water?
EPA monitoring detected Copper, Nitrate, Dibromochloromethane, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Cimarron Park Water serve?
Cimarron Park Water reports serving 2,079 people in Texas, per its EPA record.
Has Cimarron Park Water had any water quality violations?
The EPA has 3 violations on file for Cimarron Park Water, of which 1 is health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.