Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2014-10-01 |
| MR | Monitoring | Resolved | 2014-10-01 |
| MR | Monitoring | Resolved | 2014-10-01 |
| MR | Monitoring | Resolved | 2014-10-01 |
| MR | Monitoring | Resolved | 2013-10-01 |
| MR | Monitoring | Resolved | 2012-10-01 |
| Other | Monitoring | Resolved | 2010-10-10 |
| Other | Monitoring | Resolved | 2010-10-10 |
| MR | Monitoring | Resolved | 2010-06-01 → 2010-06-30 |
| MR | Monitoring | Resolved | 2010-06-01 → 2010-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 156.15 µg/L 12% of the EPA limit 1300 µg/L
worst single sample: 220 µg/L | 32/35 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 10.22 µg/L 17% of the EPA limit 60 µg/L
worst single sample: 11.5 µg/L | 17/23 | SYR4 | 2012–2019 |
| Lead | 13 µg/L 87% of the EPA limit 15 µg/L | 15/35 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 6.41 µg/L No EPA limit set
worst single sample: 6.8 µg/L | 14/23 | SYR4 | 2012–2019 |
| TTHM | 7.48 µg/L 9.4% of the EPA limit 80 µg/L
worst single sample: 10.6 µg/L | 13/23 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 6.55 µg/L No EPA limit set
worst single sample: 8.5 µg/L | 11/23 | SYR4 | 2012–2019 |
| Chloroform | 5.55 µg/L No EPA limit set
worst single sample: 7.3 µg/L | 8/23 | SYR4 | 2012–2019 |
| Bromoform | 1.87 µg/L No EPA limit set
worst single sample: 1.9 µg/L | 7/23 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.64 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 5/23 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 5/5 | LCR | 2025 |
| Trichloroacetic Acid | 1.785 µg/L No EPA limit set
worst single sample: 1.8 µg/L | 4/23 | SYR4 | 2012–2019 |
| Bromodichloromethane | 1.86 µg/L No EPA limit set
worst single sample: 1.9 µg/L | 3/23 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 4.535 µg/L No EPA limit set
worst single sample: 4.6 µg/L | 2/23 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 2.9 µg/L No EPA limit set | 1/23 | SYR4 | 2012–2019 |
Utility contact
Frequently asked questions about Fort Bend County Mud 128
Is Fort Bend County Mud 128 tap water safe to drink?
EPA monitoring detected 14 contaminants in Fort Bend County Mud 128's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Fort Bend County Mud 128's water?
EPA monitoring detected Copper, Total Haloacetic Acids (HAA5), Lead, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.
How many people does Fort Bend County Mud 128 serve?
Fort Bend County Mud 128 reports serving 10,974 people in Texas, per its EPA record.
Has Fort Bend County Mud 128 had any water quality violations?
The EPA has 11 violations on file for Fort Bend County Mud 128, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.