Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2004-05-01 |
| MR | Monitoring | Resolved | 2004-01-01 → 2004-01-31 |
| MR | Monitoring | Resolved | 2004-01-01 → 2004-01-31 |
| MR | Monitoring | Resolved | 2004-01-01 → 2004-01-31 |
| MR | Monitoring | Resolved | 2004-01-01 → 2004-01-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 16.48 µg/L No EPA limit set
worst single sample: 23.9 µg/L | 48/48 | SYR4 | 2012–2019 |
| Chloroform | 32.49 µg/L No EPA limit set
worst single sample: 33.9 µg/L | 48/48 | SYR4 | 2012–2019 |
| Dibromochloromethane | 7.855 µg/L No EPA limit set
worst single sample: 15.8 µg/L | 48/48 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 31.65 µg/L No EPA limit set
worst single sample: 33.5 µg/L | 43/43 | SYR4 | 2012–2019 |
| TTHM | 48.84 µg/L 61% of the EPA limit 80 µg/L
worst single sample: 68.4 µg/L | 43/43 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 44.18 µg/L 74% of the EPA limit 60 µg/L
worst single sample: 48.1 µg/L | 43/43 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 9.98 µg/L No EPA limit set
worst single sample: 12.9 µg/L | 43/43 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.4 µg/L No EPA limit set
worst single sample: 6.1 µg/L | 42/43 | SYR4 | 2012–2019 |
| Copper | 421.5 µg/L 32% of the EPA limit 1300 µg/L
worst single sample: 512 µg/L | 38/42 | SYR4 | 2012–2019 |
| Bromoform | 3.06 µg/L No EPA limit set
worst single sample: 5.1 µg/L | 30/48 | SYR4 | 2012–2019 |
| Nitrate | 610 µg/L 6.1% of the EPA limit 10000 µg/L | 14/16 | SYR4 | 2012–2019 |
| Atrazine | 0.5040 µg/L 17% of the EPA limit 3 µg/L
worst single sample: 0.6000 µg/L | 7/8 | SYR4 | 2015–2019 |
| Simazine | 0.2050 µg/L 5.1% of the EPA limit 4 µg/L
worst single sample: 0.2200 µg/L | 7/8 | SYR4 | 2015–2019 |
| Lead | 2.72 µg/L 18% of the EPA limit 15 µg/L
worst single sample: 2.76 µg/L | 6/42 | SYR4 | 2012–2019 |
| Lead | 0.00090 mg/L 6% of the EPA limit 0.0150 mg/L | 5/5 | LCR | 2025 |
| Lithium | 16.7 µg/L No EPA limit set | 4/4 | UCMR-5 | 2024 |
| Barium | 173.28 µg/L 8.7% of the EPA limit 2000 µg/L
worst single sample: 184 µg/L | 3/3 | SYR4 | 2012–2019 |
| Fluoride | 368 µg/L 9.2% of the EPA limit 4000 µg/L
worst single sample: 370 µg/L | 3/3 | SYR4 | 2012–2018 |
| Monochloroacetic Acid | 3.45 µg/L No EPA limit set
worst single sample: 3.5 µg/L | 3/43 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 531 µg/L 5.3% of the EPA limit 10000 µg/L
worst single sample: 540 µg/L | 2/2 | SYR4 | 2013–2014 |
| Arsenic | 2.6 µg/L 26% of the EPA limit 10 µg/L | 1/3 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2015 |
| Monobromoacetic Acid | 1.1 µg/L No EPA limit set | 1/43 | SYR4 | 2012–2019 |
81 contaminants tested, none detected
Utility contact
Frequently asked questions about Fort Bend County Mud 122
Is Fort Bend County Mud 122 tap water safe to drink?
EPA monitoring detected 28 contaminants in Fort Bend County Mud 122's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Fort Bend County Mud 122's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.
How many people does Fort Bend County Mud 122 serve?
Fort Bend County Mud 122 reports serving 3,366 people in Texas, per its EPA record.
Has Fort Bend County Mud 122 had any water quality violations?
The EPA has 5 violations on file for Fort Bend County Mud 122, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.