Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2021-01-01 |
| MR | Monitoring | Resolved | 2021-01-01 |
| MR | Monitoring | Resolved | 2021-01-01 |
| MR | Monitoring | Resolved | 2021-01-01 |
| MR | Monitoring | Resolved | 2020-07-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-07-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-07-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-07-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2014-04-01 → 2014-06-30 |
| MR | Monitoring | Resolved | 2014-04-01 → 2014-06-30 |
PFAS detected
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfba | 0.0087 µg/L | 4/4 | 2025 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 756.05 µg/L 58% of the EPA limit 1300 µg/L
worst single sample: 998 µg/L | 250/250 | SYR4 | 2012–2018 |
| Bromodichloromethane | 24.155 µg/L No EPA limit set
worst single sample: 35.3 µg/L | 210/210 | SYR4 | 2012–2019 |
| Chloroform | 18.355 µg/L No EPA limit set
worst single sample: 22 µg/L | 210/210 | SYR4 | 2012–2019 |
| Dibromochloromethane | 16.11 µg/L No EPA limit set
worst single sample: 19.2 µg/L | 210/210 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 22.055 µg/L No EPA limit set
worst single sample: 23.6 µg/L | 210/210 | SYR4 | 2012–2019 |
| TTHM | 60.995 µg/L 76% of the EPA limit 80 µg/L
worst single sample: 73.6 µg/L | 210/210 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 33.51 µg/L 56% of the EPA limit 60 µg/L
worst single sample: 40.8 µg/L | 210/210 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 5.7 µg/L No EPA limit set
worst single sample: 9.3 µg/L | 206/210 | SYR4 | 2012–2019 |
| Bromoform | 5.5545 µg/L No EPA limit set
worst single sample: 16 µg/L | 154/210 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 11.995 µg/L No EPA limit set
worst single sample: 20.6 µg/L | 142/210 | SYR4 | 2012–2019 |
| Lead | 4.175 µg/L 28% of the EPA limit 15 µg/L
worst single sample: 61.9 µg/L | 126/250 | SYR4 | 2012–2018 |
| Monobromoacetic Acid | 4.95 µg/L No EPA limit set
worst single sample: 7.1 µg/L | 111/210 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 4.55 µg/L No EPA limit set
worst single sample: 5.8 µg/L | 71/210 | SYR4 | 2012–2019 |
| Lead | 0.00090 mg/L 6% of the EPA limit 0.0150 mg/L | 19/19 | LCR | 2025 |
29 contaminants tested, none detected
Utility contact
Frequently asked questions about City of Mckinney
Is City of Mckinney tap water safe to drink?
EPA monitoring detected 15 contaminants in City of Mckinney's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Mckinney's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does City of Mckinney serve?
City of Mckinney reports serving 224,043 people in Texas, per its EPA record.
Has City of Mckinney had any water quality violations?
The EPA has 12 violations on file for City of Mckinney, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.