Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2004-07-01 |
| Other | Monitoring | Resolved | 2004-07-01 |
| Other | Monitoring | Resolved | 2003-07-01 |
| Other | Monitoring | Resolved | 2003-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 2040 µg/L 20% of the EPA limit 10000 µg/L | 32/32 | SYR4 | 2012–2019 |
| Copper | 115 µg/L 8.8% of the EPA limit 1300 µg/L
worst single sample: 209 µg/L | 21/24 | SYR4 | 2014–2018 |
| Dibromochloromethane | 14.16 µg/L No EPA limit set
worst single sample: 15.2 µg/L | 17/24 | SYR4 | 2013–2019 |
| Bromodichloromethane | 8.96 µg/L No EPA limit set
worst single sample: 9.1 µg/L | 15/24 | SYR4 | 2013–2019 |
| Bromoform | 18.125 µg/L No EPA limit set
worst single sample: 24.3 µg/L | 14/24 | SYR4 | 2013–2019 |
| Chloroform | 5.775 µg/L No EPA limit set
worst single sample: 6.1 µg/L | 14/24 | SYR4 | 2013–2019 |
| Lead | 1.65 µg/L 11% of the EPA limit 15 µg/L
worst single sample: 1.8 µg/L | 11/24 | SYR4 | 2014–2018 |
| Lead | 0.0014 mg/L 9.3% of the EPA limit 0.0150 mg/L | 8/8 | LCR | 2024 |
| TTHM | 42.41 µg/L 53% of the EPA limit 80 µg/L
worst single sample: 45 µg/L | 8/8 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 3.46 µg/L No EPA limit set
worst single sample: 3.7 µg/L | 7/8 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 11.79 µg/L 20% of the EPA limit 60 µg/L
worst single sample: 12.9 µg/L | 7/8 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 10.4 µg/L No EPA limit set
worst single sample: 11.5 µg/L | 6/8 | SYR4 | 2013–2019 |
| Fluoride | 235 µg/L 5.9% of the EPA limit 4000 µg/L
worst single sample: 240 µg/L | 6/6 | SYR4 | 2012–2018 |
| Nitrate-Nitrite | 1982.5 µg/L 20% of the EPA limit 10000 µg/L
worst single sample: 1990 µg/L | 6/6 | SYR4 | 2013–2019 |
| Barium | 49.095 µg/L 2.5% of the EPA limit 2000 µg/L
worst single sample: 49.5 µg/L | 4/4 | SYR4 | 2014–2017 |
| Xylenes, Total | 22.825 µg/L 0.2% of the EPA limit 10000 µg/L
worst single sample: 24 µg/L | 2/16 | SYR4 | 2013–2019 |
| 2,4-D | 0.2000 µg/L 0.3% of the EPA limit 70 µg/L | 1/10 | SYR4 | 2012–2019 |
| Combined Uranium | 1 µg/L 3.3% of the EPA limit 30 µg/L | 1/2 | SYR4 | 2015 |
| Ethylbenzene | 3.3 µg/L 0.5% of the EPA limit 700 µg/L | 1/16 | SYR4 | 2013–2019 |
| Selenium | 4.5 µg/L 9% of the EPA limit 50 µg/L | 1/4 | SYR4 | 2014–2017 |
88 contaminants tested, none detected
Utility contact
Frequently asked questions about Coolcrest Water
Is Coolcrest Water tap water safe to drink?
EPA monitoring detected 20 contaminants in Coolcrest Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Coolcrest Water's water?
EPA monitoring detected Nitrate, Copper, Dibromochloromethane, Bromodichloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Coolcrest Water serve?
Coolcrest Water reports serving 951 people in Texas, per its EPA record.
Has Coolcrest Water had any water quality violations?
The EPA has 4 violations on file for Coolcrest Water, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.