← Texas

Tap water quality report

City of Kirby

EPA monitoring tested this supplier for 109 contaminants and detected 21. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

109
contaminants tested
21
detected
8,142
people served
1
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Bexar

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

1
health-based violations
32
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Archived 1993-07-01 → 1993-07-31
RPT Monitoring Resolved 2025-07-02
Other Monitoring Resolved 2024-06-01
Other Monitoring Resolved 2024-06-01
MR Monitoring Resolved 2024-04-01 → 2024-06-30
MR Monitoring Resolved 2024-04-01 → 2024-06-30
MR Monitoring Resolved 2024-04-01 → 2024-06-30
MR Monitoring Resolved 2024-04-01 → 2024-06-30
MR Monitoring Resolved 2024-01-01 → 2024-03-31
MR Monitoring Resolved 2024-01-01 → 2024-03-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
121.85 µg/L 9.4%
of the EPA limit 1300 µg/L
worst single sample: 177 µg/L
64/64 SYR4 2013–2019
Nitrate
1964.5 µg/L 20%
of the EPA limit 10000 µg/L
worst single sample: 1970 µg/L
32/32 SYR4 2012–2019
Lead
2.2 µg/L 15%
of the EPA limit 15 µg/L
worst single sample: 4 µg/L
21/64 SYR4 2013–2019
Lead
0.0020 mg/L 13%
of the EPA limit 0.0150 mg/L
14/14 LCR 2023
Bromoform
6.255 µg/L
No EPA limit set
worst single sample: 9 µg/L
10/21 SYR4 2012–2019
Nitrate-Nitrite
1942 µg/L 19%
of the EPA limit 10000 µg/L
worst single sample: 1970 µg/L
8/8 SYR4 2012–2019
Dibromochloromethane
14.54 µg/L
No EPA limit set
worst single sample: 20 µg/L
7/21 SYR4 2012–2019
Barium
124 µg/L 6.2%
of the EPA limit 2000 µg/L
6/6 SYR4 2016–2019
Fluoride
549.5 µg/L 14%
of the EPA limit 4000 µg/L
worst single sample: 560 µg/L
4/4 SYR4 2014–2017
TTHM
3.525 µg/L 4.4%
of the EPA limit 80 µg/L
worst single sample: 3.9 µg/L
4/8 SYR4 2013–2019
Xylenes, Total
106.41 µg/L 1.1%
of the EPA limit 10000 µg/L
worst single sample: 118 µg/L
3/13 SYR4 2012–2019
Lithium
15.5 µg/L
No EPA limit set
3/4 UCMR-5 2025
Bromodichloromethane
14.3 µg/L
No EPA limit set
worst single sample: 15 µg/L
2/21 SYR4 2012–2019
Combined Radium (-226 And -228)
1.5 pCi/L 30%
of the EPA limit 5 pCi/L
2/2 SYR4 2016
Ethylbenzene
17.125 µg/L 2.4%
of the EPA limit 700 µg/L
worst single sample: 18 µg/L
2/13 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
3.11 µg/L 5.2%
of the EPA limit 60 µg/L
worst single sample: 3.2 µg/L
2/8 SYR4 2013–2019
Chloroform
2 µg/L
No EPA limit set
1/21 SYR4 2012–2019
Dibromoacetic Acid
1.4 µg/L
No EPA limit set
1/8 SYR4 2013–2019
Monochloroacetic Acid
3.2 µg/L
No EPA limit set
1/8 SYR4 2013–2019
Thallium, Total
0.4100 µg/L 21%
of the EPA limit 2 µg/L
1/6 SYR4 2016–2019
Toluene
0.5000 µg/L 0.1%
of the EPA limit 1000 µg/L
1/13 SYR4 2012–2019
88 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDichloroacetic AcidDinosebEthylene DibromideEndrinGross Alpha, Excl. Radon And UGross Beta Particle ActivityHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidNetfosaaNfdhaNmefosaaNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneToxapheneTrichloroacetic AcidTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
GRIDER, JANESHIA
Phone
210-661-3198
Email
[email protected]

Frequently asked questions about City of Kirby

Is City of Kirby tap water safe to drink?

EPA monitoring detected 21 contaminants in City of Kirby's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in City of Kirby's water?

EPA monitoring detected Copper, Nitrate, Lead, Lead, Bromoform, and others. The full list with the level and data source for each is above.

How many people does City of Kirby serve?

City of Kirby reports serving 8,142 people in Texas, per its EPA record.

Has City of Kirby had any water quality violations?

The EPA has 32 violations on file for City of Kirby, of which 1 is health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.