Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2007-09-01 → 2007-09-30 |
| MCL | Health-based | Resolved | 2007-09-01 → 2007-09-30 |
| MCL | Health-based | Resolved | 2007-09-01 → 2007-09-30 |
| MCL | Health-based | Resolved | 2007-09-01 → 2007-09-30 |
| MCL | Health-based | Resolved | 2007-09-01 → 2007-09-30 |
| MCL | Health-based | Resolved | 2007-09-01 → 2007-09-30 |
| MCL | Health-based | Resolved | 2007-09-01 → 2007-09-30 |
| Other | Monitoring | Resolved | 2025-07-01 |
| Other | Monitoring | Resolved | 2025-07-01 |
| MR | Monitoring | Resolved | 2025-07-01 → 2025-09-30 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 21.42 µg/L No EPA limit set
worst single sample: 23.5 µg/L | 62/62 | SYR4 | 2012–2019 |
| Chloroform | 27.86 µg/L No EPA limit set
worst single sample: 37.2 µg/L | 62/62 | SYR4 | 2012–2019 |
| Dibromochloromethane | 11.8 µg/L No EPA limit set
worst single sample: 12.7 µg/L | 62/62 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 25.59 µg/L No EPA limit set
worst single sample: 29 µg/L | 62/62 | SYR4 | 2012–2019 |
| TTHM | 56.495 µg/L 71% of the EPA limit 80 µg/L
worst single sample: 68.6 µg/L | 62/62 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 39.895 µg/L 66% of the EPA limit 60 µg/L
worst single sample: 44.7 µg/L | 62/62 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 4.205 µg/L No EPA limit set
worst single sample: 4.4 µg/L | 60/62 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 11.64 µg/L No EPA limit set
worst single sample: 13.3 µg/L | 59/62 | SYR4 | 2012–2019 |
| Bromoform | 3.73 µg/L No EPA limit set
worst single sample: 4.1 µg/L | 35/62 | SYR4 | 2012–2019 |
| Copper | 60.6 µg/L 4.7% of the EPA limit 1300 µg/L
worst single sample: 120 µg/L | 25/40 | SYR4 | 2014–2017 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2023 |
| Monochloroacetic Acid | 5.28 µg/L No EPA limit set
worst single sample: 5.6 µg/L | 9/62 | SYR4 | 2012–2019 |
| Lead | 2.22 µg/L 15% of the EPA limit 15 µg/L
worst single sample: 2.3 µg/L | 3/40 | SYR4 | 2014–2017 |
| Monobromoacetic Acid | 1.095 µg/L No EPA limit set
worst single sample: 1.1 µg/L | 2/62 | SYR4 | 2012–2019 |
27 contaminants tested, none detected
Utility contact
Frequently asked questions about Bell County Wcid 3
Is Bell County Wcid 3 tap water safe to drink?
EPA monitoring detected 17 contaminants in Bell County Wcid 3's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bell County Wcid 3's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.
How many people does Bell County Wcid 3 serve?
Bell County Wcid 3 reports serving 7,836 people in Texas, per its EPA record.
Has Bell County Wcid 3 had any water quality violations?
The EPA has 34 violations on file for Bell County Wcid 3, of which 7 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.