Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
75
health-based violations
167
violations on file
0
still open
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2017-04-01 → 2017-06-30 |
| MCL | Health-based | Resolved | 2017-04-01 → 2017-06-30 |
| MCL | Health-based | Resolved | 2017-04-01 → 2017-06-30 |
| MCL | Health-based | Resolved | 2017-04-01 → 2017-06-30 |
| MCL | Health-based | Resolved | 2017-04-01 → 2017-06-30 |
| MCL | Health-based | Resolved | 2017-04-01 → 2017-06-30 |
PFAS detected
PFAS are industrial “forever chemicals”. These are the EPA's latest
nationwide test results (2023–2025).
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfba | 0.0052 µg/L | 1/6 | 2025 |
Other contaminants detected
Each bar shows the measured level as a share of the EPA limit: green is
well under, amber is close to it, red is over. For lead and copper the
limit applies to exactly the 90th-percentile figure shown, so red there
means a real exceedance. For everything else the limit applies to a
running annual average while the figure is the 95th percentile of this
system's samples — over 100% is worth reading, but is not by itself a
violation. Where a single sample came in higher than that percentile, it
is noted under the bar. Formal violations are listed separately.
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 499 µg/L 38% of the EPA limit 1300 µg/L
worst single sample: 1700 µg/L | 122/124 | SYR4 | 2013–2018 |
| Bromodichloromethane | 42.005 µg/L No EPA limit set
worst single sample: 85.8 µg/L | 80/80 | SYR4 | 2012–2019 |
| Chloroform | 42.14 µg/L No EPA limit set
worst single sample: 283 µg/L | 79/80 | SYR4 | 2012–2019 |
| Dibromochloromethane | 43.55 µg/L No EPA limit set
worst single sample: 82.4 µg/L | 76/80 | SYR4 | 2012–2019 |
| Bromoform | 50.35 µg/L No EPA limit set
worst single sample: 88 µg/L | 75/80 | SYR4 | 2012–2019 |
| Nitrate | 729 µg/L 7.3% of the EPA limit 10000 µg/L
worst single sample: 850 µg/L | 62/64 | SYR4 | 2012–2019 |
| TTHM | 156 µg/L 195% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 403 µg/L | 61/61 | SYR4 | 2012–2019 |
| Lead | 14 µg/L 93% of the EPA limit 15 µg/L
worst single sample: 39 µg/L | 51/124 | SYR4 | 2013–2018 |
| Total Haloacetic Acids (HAA5) | 78.935 µg/L 132% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 118 µg/L | 44/62 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 36.8 µg/L No EPA limit set
worst single sample: 74.2 µg/L | 43/62 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 21.63 µg/L No EPA limit set
worst single sample: 31 µg/L | 40/62 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 15.42 µg/L No EPA limit set
worst single sample: 75.1 µg/L | 38/62 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 3.94 µg/L No EPA limit set
worst single sample: 4.9 µg/L | 17/62 | SYR4 | 2012–2019 |
| Lead | 0.0025 mg/L 17% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2023 |
| Nitrate-Nitrite | 772 µg/L 7.7% of the EPA limit 10000 µg/L
worst single sample: 850 µg/L | 14/14 | SYR4 | 2012–2015 |
| Atrazine | 0.2160 µg/L 7.2% of the EPA limit 3 µg/L
worst single sample: 0.2200 µg/L | 9/22 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 12.16 µg/L No EPA limit set
worst single sample: 15.2 µg/L | 9/62 | SYR4 | 2012–2019 |
| Xylenes, Total | 3.32 µg/L 0% of the EPA limit 10000 µg/L
worst single sample: 3.6 µg/L | 9/19 | SYR4 | 2014–2019 |
| Lithium | 133 µg/L No EPA limit set | 9/9 | UCMR-5 | 2025 |
| Barium | 46.55 µg/L 2.3% of the EPA limit 2000 µg/L
worst single sample: 46.7 µg/L | 4/4 | SYR4 | 2014–2017 |
| Fluoride | 1432 µg/L 36% of the EPA limit 4000 µg/L
worst single sample: 1480 µg/L | 4/4 | SYR4 | 2014–2017 |
| Dalapon | 3.04 µg/L 1.5% of the EPA limit 200 µg/L
worst single sample: 3.2 µg/L | 3/56 | SYR4 | 2012–2019 |
| Selenium | 5.85 µg/L 12% of the EPA limit 50 µg/L
worst single sample: 5.9 µg/L | 3/4 | SYR4 | 2014–2017 |
| Arsenic | 2.295 µg/L 23% of the EPA limit 10 µg/L
worst single sample: 2.3 µg/L | 2/4 | SYR4 | 2014–2017 |
| Combined Radium (-226 And -228) | 1.478 pCi/L 30% of the EPA limit 5 pCi/L
worst single sample: 1.5 pCi/L | 2/2 | SYR4 | 2016 |
| Ethylbenzene | 0.5000 µg/L 0.1% of the EPA limit 700 µg/L | 1/19 | SYR4 | 2014–2019 |
| Gross Alpha, Excl. Radon And U | 5.4 pCi/L 36% of the EPA limit 15 pCi/L | 1/2 | SYR4 | 2016 |
| Nitrite | 10 µg/L 1% of the EPA limit 1000 µg/L | 1/14 | SYR4 | 2012–2015 |
80 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAsbestosBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebEthylene DibromideEndrinGross Beta Particle ActivityHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaOxamylPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene
Utility contact
Frequently asked questions about Bell Milam Falls Wsc
Is Bell Milam Falls Wsc tap water safe to drink?
EPA monitoring detected 29 contaminants in Bell Milam Falls Wsc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bell Milam Falls Wsc's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Bell Milam Falls Wsc serve?
Bell Milam Falls Wsc reports serving 6,885 people in Texas, per its EPA record.
Has Bell Milam Falls Wsc had any water quality violations?
The EPA has 167 violations on file for Bell Milam Falls Wsc, of which 75 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.