Tap WaterIndex

← Texas

Tap water quality report

Dogwood Springs Wsc Plant 1

EPA monitoring tested this supplier for 77 contaminants and detected 19. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

77
contaminants tested
19
detected
642
people served
6
health-based violations
Texas rankingsLead in TexasPFAS in Texas
Water source
Ground water
Ownership
Local government
Counties served
Anderson

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

6
health-based violations
38
violations on file
4
still open
ViolationTypeStatusPeriod
TT Health-based Unaddressed 2026-03-01
TT Health-based Unaddressed 2026-03-01
TT Health-based Unaddressed 2026-03-01
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
MR Monitoring Resolved 2025-12-30
MR Monitoring Resolved 2025-12-30
Other Monitoring Resolved 2025-09-20
Other Monitoring Resolved 2025-09-20

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
292.7 µg/L 23%
of the EPA limit 1300 µg/L
worst single sample: 443 µg/L
22/22 SYR4 2013–2018
Chloroform
6.19 µg/L
No EPA limit set
worst single sample: 6.76 µg/L
16/16 SYR4 2013–2019
Bromodichloromethane
4.371 µg/L
No EPA limit set
worst single sample: 4.7 µg/L
15/16 SYR4 2013–2019
Dibromochloromethane
3.291 µg/L
No EPA limit set
worst single sample: 3.9 µg/L
15/16 SYR4 2013–2019
Nitrate
43.9 µg/L 0.4%
of the EPA limit 10000 µg/L
 14/14 SYR4 2013–2019
Lead
3.17 µg/L 21%
of the EPA limit 15 µg/L
worst single sample: 3.2 µg/L
11/22 SYR4 2013–2018
Lead
0.0184 mg/L 123%
above the EPA limit of 0.0150 mg/L
 7/7 LCR 2025
Dichloroacetic Acid
3.5 µg/L
No EPA limit set
worst single sample: 3.8 µg/L
6/6 SYR4 2014–2019
TTHM
14.25 µg/L 18%
of the EPA limit 80 µg/L
worst single sample: 14.6 µg/L
6/8 SYR4 2013–2019
Total Haloacetic Acids (HAA5)
6.125 µg/L 10%
of the EPA limit 60 µg/L
worst single sample: 6.6 µg/L
6/6 SYR4 2014–2019
Trichloroacetic Acid
2.6 µg/L
No EPA limit set
worst single sample: 2.8 µg/L
5/6 SYR4 2014–2019
Xylenes, Total
2.326 µg/L 0%
of the EPA limit 10000 µg/L
worst single sample: 2.35 µg/L
5/10 SYR4 2013–2019
Barium
42.53 µg/L 2.1%
of the EPA limit 2000 µg/L
worst single sample: 42.7 µg/L
3/3 SYR4 2013–2019
Di(2-ethylhexyl) Phthalate
0.7250 µg/L 12%
of the EPA limit 6 µg/L
worst single sample: 0.7500 µg/L
3/9 SYR4 2013–2019
Fluoride
138.6 µg/L 3.5%
of the EPA limit 4000 µg/L
worst single sample: 140 µg/L
3/3 SYR4 2013–2019
Chromium
2.41745 µg/L 2.4%
of the EPA limit 100 µg/L
worst single sample: 2.5 µg/L
2/3 SYR4 2013–2019
Cyanide
5.83 µg/L 2.9%
of the EPA limit 200 µg/L
 1/3 SYR4 2013–2019
Dibromoacetic Acid
1.3 µg/L
No EPA limit set
 1/6 SYR4 2014–2019
Ethylbenzene
0.5100 µg/L 0.1%
of the EPA limit 700 µg/L
 1/10 SYR4 2013–2019
58 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDinosebEthylene DibromideEndrinGross Alpha, Excl. Radon And UGross Beta Particle ActivityHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
BOONE, LARRY
Phone
254-721-6834
Email
[email protected]

Frequently asked questions about Dogwood Springs Wsc Plant 1

Is Dogwood Springs Wsc Plant 1 tap water safe to drink?

EPA monitoring detected 19 contaminants in Dogwood Springs Wsc Plant 1's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Dogwood Springs Wsc Plant 1's water?

EPA monitoring detected Copper, Chloroform, Bromodichloromethane, Dibromochloromethane, Nitrate, and others. The full list with the level and data source for each is above.

How many people does Dogwood Springs Wsc Plant 1 serve?

Dogwood Springs Wsc Plant 1 reports serving 642 people in Texas, per its EPA record.

Has Dogwood Springs Wsc Plant 1 had any water quality violations?

The EPA has 38 violations on file for Dogwood Springs Wsc Plant 1, of which 6 are health-based (a contaminant limit or required treatment was breached) and 4 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.