Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2014-07-01 → 2014-09-30 |
| MCL | Health-based | Resolved | 2014-07-01 → 2014-09-30 |
| MCL | Health-based | Resolved | 2014-07-01 → 2014-09-30 |
| MCL | Health-based | Resolved | 2014-07-01 → 2014-09-30 |
| MCL | Health-based | Resolved | 2014-07-01 → 2014-09-30 |
| MCL | Health-based | Resolved | 2014-07-01 → 2014-09-30 |
| MCL | Health-based | Resolved | 2014-07-01 → 2014-09-30 |
| MCL | Health-based | Resolved | 2014-07-01 → 2014-09-30 |
| Other | Monitoring | Resolved | 2021-10-01 |
| Other | Monitoring | Resolved | 2021-10-01 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 22.475 µg/L No EPA limit set
worst single sample: 33.8 µg/L | 116/116 | SYR4 | 2012–2019 |
| Chloroform | 35.625 µg/L No EPA limit set
worst single sample: 58.7 µg/L | 116/116 | SYR4 | 2012–2019 |
| Dibromochloromethane | 27.625 µg/L No EPA limit set
worst single sample: 36.9 µg/L | 116/116 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 14.175 µg/L No EPA limit set
worst single sample: 18.8 µg/L | 116/116 | SYR4 | 2012–2019 |
| TTHM | 80.15 µg/L 100% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 129 µg/L | 116/116 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 24.425 µg/L 41% of the EPA limit 60 µg/L
worst single sample: 29.6 µg/L | 116/116 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 8 µg/L No EPA limit set
worst single sample: 9.9 µg/L | 108/116 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 8.6 µg/L No EPA limit set
worst single sample: 10.7 µg/L | 101/116 | SYR4 | 2012–2019 |
| Bromoform | 14.6 µg/L No EPA limit set
worst single sample: 21.4 µg/L | 69/116 | SYR4 | 2012–2019 |
| Copper | 52.95 µg/L 4.1% of the EPA limit 1300 µg/L
worst single sample: 245 µg/L | 62/70 | SYR4 | 2012–2018 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 19/19 | LCR | 2024 |
| Lead | 25.6 µg/L 171% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 46 µg/L | 18/70 | SYR4 | 2012–2018 |
| Monobromoacetic Acid | 7.568 µg/L No EPA limit set
worst single sample: 7.67 µg/L | 18/116 | SYR4 | 2012–2019 |
29 contaminants tested, none detected
Utility contact
Frequently asked questions about Fort Mill Town of (sc4610003)
Is Fort Mill Town of (sc4610003) tap water safe to drink?
EPA monitoring detected 15 contaminants in Fort Mill Town of (sc4610003)'s water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Fort Mill Town of (sc4610003)'s water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.
How many people does Fort Mill Town of (sc4610003) serve?
Fort Mill Town of (sc4610003) reports serving 25,000 people in South Carolina, per its EPA record.
Has Fort Mill Town of (sc4610003) had any water quality violations?
The EPA has 24 violations on file for Fort Mill Town of (sc4610003), of which 8 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.