Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 1991-08-01 → 1991-08-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 11.522 µg/L No EPA limit set
worst single sample: 16.91 µg/L | 123/124 | SYR4 | 2012–2019 |
| Chloroform | 39.821 µg/L No EPA limit set
worst single sample: 50.94 µg/L | 123/124 | SYR4 | 2012–2019 |
| TTHM | 49.099 µg/L 61% of the EPA limit 80 µg/L
worst single sample: 71.54 µg/L | 123/124 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 63.1355 µg/L 105% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 77.5 µg/L | 122/124 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 23.2195 µg/L No EPA limit set
worst single sample: 30.22 µg/L | 122/124 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 34.4285 µg/L No EPA limit set
worst single sample: 47.76 µg/L | 118/124 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 4.278 µg/L No EPA limit set
worst single sample: 11.43 µg/L | 94/124 | SYR4 | 2012–2019 |
| Copper | 288 µg/L 22% of the EPA limit 1300 µg/L
worst single sample: 420 µg/L | 53/55 | SYR4 | 2014–2017 |
| Dibromochloromethane | 3.195 µg/L No EPA limit set
worst single sample: 3.69 µg/L | 39/124 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 5.3395 µg/L No EPA limit set
worst single sample: 17.92 µg/L | 22/124 | SYR4 | 2012–2019 |
| Lead | 0.00058 mg/L 3.9% of the EPA limit 0.0150 mg/L | 17/17 | LCR | 2023 |
| Lead | 5.94 µg/L 40% of the EPA limit 15 µg/L
worst single sample: 11 µg/L | 12/55 | SYR4 | 2014–2017 |
| Monochloroacetic Acid | 3.5725 µg/L No EPA limit set
worst single sample: 3.6 µg/L | 6/124 | SYR4 | 2012–2019 |
24 contaminants tested, none detected
Utility contact
Frequently asked questions about Conway City of (sc2610008)
Is Conway City of (sc2610008) tap water safe to drink?
EPA monitoring detected 20 contaminants in Conway City of (sc2610008)'s water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Conway City of (sc2610008)'s water?
EPA monitoring detected Bromodichloromethane, Chloroform, TTHM, Total Haloacetic Acids (HAA5), Trichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Conway City of (sc2610008) serve?
Conway City of (sc2610008) reports serving 27,005 people in South Carolina, per its EPA record.
Has Conway City of (sc2610008) had any water quality violations?
The EPA has 1 violation on file for Conway City of (sc2610008), of which 1 is health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.