Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2000-10-01 → 2000-10-31 |
| MR | Monitoring | Resolved | 2024-01-01 → 2024-03-31 |
| MR | Monitoring | Resolved | 2024-01-01 → 2024-03-31 |
| MR | Monitoring | Resolved | 2024-01-01 → 2024-03-31 |
| MR | Monitoring | Resolved | 2024-01-01 → 2024-03-31 |
| MON | Monitoring | Resolved | 2024-01-01 → 2024-01-31 |
| MON | Monitoring | Resolved | 2024-01-01 → 2024-01-31 |
| MON | Monitoring | Resolved | 2024-01-01 → 2024-01-31 |
| MON | Monitoring | Resolved | 2024-01-01 → 2024-01-31 |
| MR | Monitoring | Resolved | 2024-01-01 → 2024-01-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 6.933 µg/L No EPA limit set
worst single sample: 8.71 µg/L | 62/62 | SYR4 | 2012–2019 |
| TTHM | 22.1505 µg/L 28% of the EPA limit 80 µg/L
worst single sample: 32.69 µg/L | 62/62 | SYR4 | 2012–2019 |
| Dibromochloromethane | 6.8115 µg/L No EPA limit set
worst single sample: 11.84 µg/L | 60/62 | SYR4 | 2012–2019 |
| Copper | 149 µg/L 11% of the EPA limit 1300 µg/L
worst single sample: 230 µg/L | 58/60 | SYR4 | 2013–2019 |
| Chloroform | 9.255 µg/L No EPA limit set
worst single sample: 13.33 µg/L | 56/62 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 27.765 µg/L 46% of the EPA limit 60 µg/L
worst single sample: 42 µg/L | 56/62 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 19.824 µg/L No EPA limit set
worst single sample: 27.09 µg/L | 52/62 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 3.6 µg/L No EPA limit set
worst single sample: 4.23 µg/L | 41/62 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 10.676 µg/L No EPA limit set
worst single sample: 12 µg/L | 37/62 | SYR4 | 2012–2019 |
| Lead | 17.69 µg/L 118% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 68 µg/L | 32/60 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 10.202 µg/L No EPA limit set
worst single sample: 19.89 µg/L | 30/62 | SYR4 | 2012–2019 |
| Lead | 0.0040 mg/L 27% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Bromoform | 14.162 µg/L No EPA limit set
worst single sample: 14.75 µg/L | 9/62 | SYR4 | 2012–2019 |
26 contaminants tested, none detected
Utility contact
Frequently asked questions about Seabrook Island Town of (1010009)
Is Seabrook Island Town of (1010009) tap water safe to drink?
EPA monitoring detected 18 contaminants in Seabrook Island Town of (1010009)'s water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Seabrook Island Town of (1010009)'s water?
EPA monitoring detected Bromodichloromethane, TTHM, Dibromochloromethane, Copper, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Seabrook Island Town of (1010009) serve?
Seabrook Island Town of (1010009) reports serving 5,939 people in South Carolina, per its EPA record.
Has Seabrook Island Town of (1010009) had any water quality violations?
The EPA has 19 violations on file for Seabrook Island Town of (1010009), of which 1 is health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.