Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2009-01-02 |
| MR | Monitoring | Resolved | 1996-10-01 |
| MR | Monitoring | Resolved | 1996-10-01 |
| MR | Monitoring | Archived | 1992-03-01 → 1992-03-31 |
| MR | Monitoring | Archived | 1992-02-01 → 1992-02-29 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 7.4055 µg/L No EPA limit set
worst single sample: 11.46 µg/L | 62/62 | SYR4 | 2012–2019 |
| TTHM | 31.0635 µg/L 39% of the EPA limit 80 µg/L
worst single sample: 38.63 µg/L | 62/62 | SYR4 | 2012–2019 |
| Dibromochloromethane | 7.75 µg/L No EPA limit set
worst single sample: 25.4 µg/L | 61/62 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 30.81 µg/L 51% of the EPA limit 60 µg/L
worst single sample: 45 µg/L | 61/62 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 23.493 µg/L No EPA limit set
worst single sample: 28.35 µg/L | 59/62 | SYR4 | 2012–2019 |
| Chloroform | 12.0535 µg/L No EPA limit set
worst single sample: 22.51 µg/L | 58/62 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 3.11 µg/L No EPA limit set
worst single sample: 7.26 µg/L | 47/62 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 5.662 µg/L No EPA limit set
worst single sample: 17.63 µg/L | 39/62 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 9.77 µg/L No EPA limit set
worst single sample: 12.12 µg/L | 35/62 | SYR4 | 2012–2019 |
| Copper | 114 µg/L 8.8% of the EPA limit 1300 µg/L
worst single sample: 120 µg/L | 33/40 | SYR4 | 2012–2018 |
| Lead | 4.045 µg/L 27% of the EPA limit 15 µg/L
worst single sample: 4.9 µg/L | 20/40 | SYR4 | 2012–2018 |
| Lead | 0.0011 mg/L 7.3% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2024 |
| Bromoform | 13.215 µg/L No EPA limit set
worst single sample: 14.24 µg/L | 11/62 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 1.0889 µg/L No EPA limit set | 1/62 | SYR4 | 2012–2019 |
24 contaminants tested, none detected
Utility contact
Frequently asked questions about Kiawah Island Utility (sc1010008)
Is Kiawah Island Utility (sc1010008) tap water safe to drink?
EPA monitoring detected 20 contaminants in Kiawah Island Utility (sc1010008)'s water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Kiawah Island Utility (sc1010008)'s water?
EPA monitoring detected Bromodichloromethane, TTHM, Dibromochloromethane, Total Haloacetic Acids (HAA5), Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Kiawah Island Utility (sc1010008) serve?
Kiawah Island Utility (sc1010008) reports serving 9,550 people in South Carolina, per its EPA record.
Has Kiawah Island Utility (sc1010008) had any water quality violations?
The EPA has 5 violations on file for Kiawah Island Utility (sc1010008), of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.