Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2013-10-01 |
| MR | Monitoring | Resolved | 2013-10-01 |
| MR | Monitoring | Resolved | 1996-01-01 |
| MR | Monitoring | Resolved | 1996-01-01 |
| MR | Monitoring | Resolved | 1993-08-01 → 1993-08-31 |
| MR | Monitoring | Resolved | 1993-08-01 → 1993-08-31 |
| MR | Monitoring | Resolved | 1993-08-01 → 1993-08-31 |
| MR | Monitoring | Resolved | 1993-07-01 → 1993-07-31 |
| MR | Monitoring | Resolved | 1993-07-01 → 1993-07-31 |
| MR | Monitoring | Archived | 1992-07-01 → 1992-07-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 19.7335 µg/L 25% of the EPA limit 80 µg/L
worst single sample: 23.9 µg/L | 62/62 | SYR4 | 2012–2019 |
| Bromodichloromethane | 6.9 µg/L No EPA limit set
worst single sample: 9.57 µg/L | 61/62 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 28.978 µg/L 48% of the EPA limit 60 µg/L
worst single sample: 62.7 µg/L | 60/62 | SYR4 | 2012–2019 |
| Dibromochloromethane | 5.188 µg/L No EPA limit set
worst single sample: 7.84 µg/L | 59/62 | SYR4 | 2012–2019 |
| Chloroform | 8.534 µg/L No EPA limit set
worst single sample: 17.36 µg/L | 58/62 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 19.2115 µg/L No EPA limit set
worst single sample: 56.9 µg/L | 58/62 | SYR4 | 2012–2019 |
| Copper | 80.55 µg/L 6.2% of the EPA limit 1300 µg/L
worst single sample: 100 µg/L | 54/56 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 8.494 µg/L No EPA limit set
worst single sample: 11.07 µg/L | 43/62 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 3.136 µg/L No EPA limit set
worst single sample: 5.28 µg/L | 42/62 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 3.8175 µg/L No EPA limit set
worst single sample: 4.48 µg/L | 36/62 | SYR4 | 2012–2019 |
| Lead | 2.675 µg/L 18% of the EPA limit 15 µg/L
worst single sample: 5.4 µg/L | 26/56 | SYR4 | 2013–2019 |
| Lead | 0.00093 mg/L 6.2% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2025 |
| Bromoform | 8.38 µg/L No EPA limit set
worst single sample: 9.98 µg/L | 9/62 | SYR4 | 2012–2019 |
24 contaminants tested, none detected
Utility contact
Frequently asked questions about Folly Beach City of (1010005)
Is Folly Beach City of (1010005) tap water safe to drink?
EPA monitoring detected 20 contaminants in Folly Beach City of (1010005)'s water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Folly Beach City of (1010005)'s water?
EPA monitoring detected TTHM, Bromodichloromethane, Total Haloacetic Acids (HAA5), Dibromochloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Folly Beach City of (1010005) serve?
Folly Beach City of (1010005) reports serving 5,086 people in South Carolina, per its EPA record.
Has Folly Beach City of (1010005) had any water quality violations?
The EPA has 17 violations on file for Folly Beach City of (1010005), of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.