Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2020-01-01 → 2020-03-31 |
| MCL | Health-based | Resolved | 2020-01-01 → 2020-03-31 |
| MCL | Health-based | Resolved | 2020-01-01 → 2020-03-31 |
| MCL | Health-based | Resolved | 2020-01-01 → 2020-03-31 |
| MCL | Health-based | Resolved | 2020-01-01 → 2020-03-31 |
| MCL | Health-based | Resolved | 2020-01-01 → 2020-03-31 |
| MCL | Health-based | Resolved | 2020-01-01 → 2020-03-31 |
| MCL | Health-based | Resolved | 2006-09-01 → 2006-09-30 |
| MCL | Health-based | Resolved | 2006-09-01 → 2006-09-30 |
| MCL | Health-based | Resolved | 2006-09-01 → 2006-09-30 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 212.75 µg/L 16% of the EPA limit 1300 µg/L
worst single sample: 469 µg/L | 136/142 | SYR4 | 2015–2019 |
| Bromodichloromethane | 16.91 µg/L No EPA limit set
worst single sample: 21.2 µg/L | 50/50 | SYR4 | 2013–2019 |
| Chloroform | 80.46 µg/L No EPA limit set
worst single sample: 91.1 µg/L | 50/50 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 20.73 µg/L No EPA limit set
worst single sample: 31.4 µg/L | 50/50 | SYR4 | 2013–2019 |
| TTHM | 103.425 µg/L 129% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 105.7 µg/L | 50/50 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 45.885 µg/L 76% of the EPA limit 60 µg/L
worst single sample: 64.8 µg/L | 50/50 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 27.91 µg/L No EPA limit set
worst single sample: 31.2 µg/L | 50/50 | SYR4 | 2013–2019 |
| Lead | 90.15 µg/L 601% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 226 µg/L | 44/142 | SYR4 | 2015–2019 |
| Dibromochloromethane | 3.5 µg/L No EPA limit set
worst single sample: 3.9 µg/L | 41/50 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 26/26 | LCR | 2025 |
| Dibromoacetic Acid | 1 µg/L No EPA limit set | 2/50 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 2.2 µg/L No EPA limit set | 1/50 | SYR4 | 2013–2019 |
28 contaminants tested, none detected
Utility contact
Frequently asked questions about Belton City of (sc0410004)
Is Belton City of (sc0410004) tap water safe to drink?
EPA monitoring detected 16 contaminants in Belton City of (sc0410004)'s water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Belton City of (sc0410004)'s water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.
How many people does Belton City of (sc0410004) serve?
Belton City of (sc0410004) reports serving 6,762 people in South Carolina, per its EPA record.
Has Belton City of (sc0410004) had any water quality violations?
The EPA has 60 violations on file for Belton City of (sc0410004), of which 21 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.