Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2023-12-17 |
| TT | Health-based | Resolved | 2023-12-17 |
| TT | Health-based | Resolved | 2023-12-17 |
| TT | Health-based | Resolved | 2023-12-17 |
| TT | Health-based | Resolved | 2023-12-17 |
| MR | Monitoring | Resolved | 2025-01-01 → 2025-03-31 |
| MR | Monitoring | Resolved | 2025-01-01 → 2025-03-31 |
| MR | Monitoring | Resolved | 2025-01-01 → 2025-03-31 |
| MR | Monitoring | Resolved | 2024-10-01 → 2024-12-31 |
| MR | Monitoring | Resolved | 2024-10-01 → 2024-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 75.915 µg/L 95% of the EPA limit 80 µg/L
worst single sample: 98.8 µg/L | 32/32 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 32.855 µg/L 55% of the EPA limit 60 µg/L
worst single sample: 35.6 µg/L | 32/32 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 19 µg/L No EPA limit set
worst single sample: 20 µg/L | 21/21 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 9.5 µg/L No EPA limit set
worst single sample: 14 µg/L | 21/21 | SYR4 | 2014–2019 |
| Bromodichloromethane | 16 µg/L No EPA limit set | 20/20 | SYR4 | 2014–2019 |
| Copper | 52.15 µg/L 4% of the EPA limit 1300 µg/L
worst single sample: 74 µg/L | 20/20 | SYR4 | 2016–2019 |
| Chloroform | 50.5 µg/L No EPA limit set
worst single sample: 79 µg/L | 20/20 | SYR4 | 2014–2019 |
| Dibromochloromethane | 4.33 µg/L No EPA limit set
worst single sample: 4.6 µg/L | 19/20 | SYR4 | 2014–2019 |
| Lead | 0.0050 mg/L 33% of the EPA limit 0.0150 mg/L | 18/18 | LCR | 2011 |
| Nitrate | 70 µg/L 0.7% of the EPA limit 10000 µg/L | 12/30 | SYR4 | 2012–2019 |
| Barium | 12 µg/L 0.6% of the EPA limit 2000 µg/L | 11/11 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 3.175 µg/L No EPA limit set
worst single sample: 3.4 µg/L | 6/21 | SYR4 | 2014–2019 |
| Di(2-ethylhexyl) Phthalate | 1.85 µg/L 31% of the EPA limit 6 µg/L
worst single sample: 2 µg/L | 4/12 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 1.76 µg/L No EPA limit set
worst single sample: 1.8 µg/L | 3/21 | SYR4 | 2014–2019 |
| Lead | 7.7 µg/L 51% of the EPA limit 15 µg/L
worst single sample: 8 µg/L | 2/20 | SYR4 | 2016–2019 |
| Benzo(A)Pyrene | 0.1000 µg/L 50% of the EPA limit 0.2000 µg/L | 1/12 | SYR4 | 2014–2019 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Stone Bridge Fire District
Is Stone Bridge Fire District tap water safe to drink?
EPA monitoring detected 16 contaminants in Stone Bridge Fire District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Stone Bridge Fire District's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Dichloroacetic Acid, Trichloroacetic Acid, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Stone Bridge Fire District serve?
Stone Bridge Fire District reports serving 2,793 people in Rhode Island, per its EPA record.
Has Stone Bridge Fire District had any water quality violations?
The EPA has 147 violations on file for Stone Bridge Fire District, of which 5 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.