Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2013-09-01 → 2013-09-30 |
| MCL | Health-based | Resolved | 2013-09-01 → 2013-09-30 |
| MCL | Health-based | Resolved | 2013-09-01 → 2013-09-30 |
| MCL | Health-based | Resolved | 2013-09-01 → 2013-09-30 |
| MCL | Health-based | Resolved | 2013-09-01 → 2013-09-30 |
| MCL | Health-based | Resolved | 2013-09-01 → 2013-09-30 |
| MR | Monitoring | Resolved | 2019-12-11 |
| MR | Monitoring | Resolved | 2019-12-11 |
| MR | Monitoring | Resolved | 2019-12-11 |
| MR | Monitoring | Resolved | 2019-12-11 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 78.9 µg/L 99% of the EPA limit 80 µg/L
worst single sample: 97 µg/L | 260/260 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 27.7 µg/L 46% of the EPA limit 60 µg/L
worst single sample: 72 µg/L | 248/248 | SYR4 | 2012–2019 |
| Bromodichloromethane | 7.69 µg/L No EPA limit set
worst single sample: 9.9 µg/L | 243/244 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 22 µg/L No EPA limit set
worst single sample: 27 µg/L | 240/240 | SYR4 | 2012–2019 |
| Chloroform | 72.7 µg/L No EPA limit set
worst single sample: 89.6 µg/L | 228/244 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 4.1 µg/L No EPA limit set
worst single sample: 7 µg/L | 220/240 | SYR4 | 2012–2019 |
| Dibromochloromethane | 2.97 µg/L No EPA limit set
worst single sample: 4.4 µg/L | 144/244 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 8.4 µg/L No EPA limit set
worst single sample: 46 µg/L | 141/240 | SYR4 | 2012–2019 |
| Lead | 12.78 µg/L 85% of the EPA limit 15 µg/L
worst single sample: 64.6 µg/L | 74/109 | SYR4 | 2013–2019 |
| Copper | 28 µg/L 2.2% of the EPA limit 1300 µg/L
worst single sample: 47 µg/L | 68/109 | SYR4 | 2013–2019 |
| Nitrate | 3350 µg/L 34% of the EPA limit 10000 µg/L
worst single sample: 3590 µg/L | 48/50 | SYR4 | 2012–2017 |
| Dibromoacetic Acid | 1.3 µg/L No EPA limit set
worst single sample: 1.5 µg/L | 31/240 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 3785 µg/L 38% of the EPA limit 10000 µg/L
worst single sample: 4600 µg/L | 31/35 | SYR4 | 2013–2019 |
| Lead | 0.0014 mg/L 9.3% of the EPA limit 0.0150 mg/L | 23/23 | LCR | 2025 |
| Bromoform | 55.3 µg/L No EPA limit set
worst single sample: 61 µg/L | 20/244 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 2.19 µg/L No EPA limit set
worst single sample: 2.4 µg/L | 15/240 | SYR4 | 2012–2019 |
| Barium | 15.7 µg/L 0.8% of the EPA limit 2000 µg/L
worst single sample: 17 µg/L | 14/14 | SYR4 | 2013–2017 |
| Chromium | 6.3 µg/L 6.3% of the EPA limit 100 µg/L
worst single sample: 7 µg/L | 8/14 | SYR4 | 2013–2017 |
| Fluoride | 725 µg/L 18% of the EPA limit 4000 µg/L
worst single sample: 740 µg/L | 7/15 | SYR4 | 2013–2017 |
| Nitrite | 69 µg/L 6.9% of the EPA limit 1000 µg/L
worst single sample: 70 µg/L | 3/26 | SYR4 | 2012–2017 |
| Di(2-ethylhexyl) Phthalate | 1 µg/L 17% of the EPA limit 6 µg/L | 2/40 | SYR4 | 2012–2017 |
| Cadmium | 1 µg/L 20% of the EPA limit 5 µg/L | 1/14 | SYR4 | 2013–2017 |
| Combined Radium (-226 And -228) | 1.2 pCi/L 24% of the EPA limit 5 pCi/L | 1/11 | SYR4 | 2013–2017 |
77 contaminants tested, none detected
Utility contact
Frequently asked questions about Kent County Water Authority
Is Kent County Water Authority tap water safe to drink?
EPA monitoring detected 29 contaminants in Kent County Water Authority's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Kent County Water Authority's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, Dichloroacetic Acid, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Kent County Water Authority serve?
Kent County Water Authority reports serving 94,107 people in Rhode Island, per its EPA record.
Has Kent County Water Authority had any water quality violations?
The EPA has 31 violations on file for Kent County Water Authority, of which 6 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.