Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2001-04-01 → 2001-06-30 |
| MCL | Health-based | Resolved | 2001-04-01 → 2001-06-30 |
| MCL | Health-based | Archived | 1993-04-01 → 1993-06-30 |
| MCL | Health-based | Archived | 1993-04-01 → 1993-06-30 |
| MCL | Health-based | Archived | 1989-11-06 → 1990-03-05 |
| MR | Monitoring | Archived | 2025-06-01 → 2025-06-30 |
| MR | Monitoring | Resolved | 2024-07-01 → 2024-07-31 |
| MR | Monitoring | Resolved | 2024-07-01 → 2024-07-31 |
| MR | Monitoring | Resolved | 2024-06-01 → 2024-06-30 |
| MR | Monitoring | Resolved | 2024-06-01 → 2024-06-30 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 8497 µg/L 85% of the EPA limit 10000 µg/L
worst single sample: 9380 µg/L | 504/504 | SYR4 | 2012–2019 |
| Copper | 802 µg/L 62% of the EPA limit 1300 µg/L
worst single sample: 1240 µg/L | 59/60 | SYR4 | 2013–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2025 |
| Chloroform | 2.15 µg/L No EPA limit set
worst single sample: 2.5 µg/L | 15/15 | SYR4 | 2013–2019 |
| Bromodichloromethane | 2 µg/L No EPA limit set | 11/13 | SYR4 | 2013–2019 |
| Dibromochloromethane | 2.8 µg/L No EPA limit set | 11/13 | SYR4 | 2013–2019 |
| TTHM | 7.56 µg/L 9.5% of the EPA limit 80 µg/L
worst single sample: 7.84 µg/L | 9/9 | SYR4 | 2013–2019 |
| Barium | 55.8 µg/L 2.8% of the EPA limit 2000 µg/L
worst single sample: 57 µg/L | 7/8 | SYR4 | 2012 |
| Bromoform | 1.87 µg/L No EPA limit set
worst single sample: 1.9 µg/L | 7/11 | SYR4 | 2013–2019 |
| Lead | 36.5 µg/L 243% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 45 µg/L | 6/60 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 1.628 µg/L 2.7% of the EPA limit 60 µg/L
worst single sample: 1.7 µg/L | 5/9 | SYR4 | 2013–2019 |
| Atrazine | 0.2780 µg/L 9.3% of the EPA limit 3 µg/L
worst single sample: 0.2800 µg/L | 3/57 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1 µg/L No EPA limit set | 1/3 | SYR4 | 2017–2019 |
| Nitrite | 420 µg/L 42% of the EPA limit 1000 µg/L | 1/244 | SYR4 | 2012–2019 |
| Tetrachloroethylene | 0.7900 µg/L 16% of the EPA limit 5 µg/L | 1/52 | SYR4 | 2012–2019 |
85 contaminants tested, none detected
Utility contact
Frequently asked questions about Shrewsbury Borough
Is Shrewsbury Borough tap water safe to drink?
EPA monitoring detected 23 contaminants in Shrewsbury Borough's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Shrewsbury Borough's water?
EPA monitoring detected Nitrate, Copper, Lead, Chloroform, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Shrewsbury Borough serve?
Shrewsbury Borough reports serving 4,727 people in Pennsylvania, per its EPA record.
Has Shrewsbury Borough had any water quality violations?
The EPA has 753 violations on file for Shrewsbury Borough, of which 5 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.