← Pennsylvania

Tap water quality report

Akron Borough

EPA monitoring tested this supplier for 109 contaminants and detected 25. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

109
contaminants tested
25
detected
4,200
people served
3
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Lancaster

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

3
health-based violations
60
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 1999-09-01 → 1999-09-30
MCL Health-based Resolved 1998-10-01 → 1998-12-31
MCL Health-based Resolved 1995-10-01 → 1995-12-31
MR Monitoring Archived 2026-04-01 → 2026-04-30
RPT Monitoring Resolved 2022-09-11
RPT Monitoring Resolved 2022-09-11
RPT Monitoring Resolved 2022-09-11
RPT Monitoring Resolved 2022-09-11
RPT Monitoring Resolved 2022-09-11
RPT Monitoring Resolved 2022-09-11

PFAS detected

PFAS are industrial “forever chemicals”. These are the EPA's latest nationwide test results (2023–2025).
ContaminantMaxDetection ratePeriod
Pfpea 0.0120 µg/L 4/4 2023
Pfhxa 0.0072 µg/L 3/4 2023
PFBS 0.0048 µg/L 2/4 2023
Pfhpa 0.0055 µg/L 2/4 2023
Pfba 0.0054 µg/L 1/4 2023
PFOA 0.0050 µg/L 1/4 2023
PFOS 0.0044 µg/L 1/4 2023

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
772 µg/L 59%
of the EPA limit 1300 µg/L
worst single sample: 1390 µg/L
73/73 SYR4 2013–2019
Nitrate
9150 µg/L 92%
of the EPA limit 10000 µg/L
worst single sample: 9500 µg/L
64/64 SYR4 2012–2019
Lead
10.54 µg/L 70%
of the EPA limit 15 µg/L
worst single sample: 18 µg/L
45/73 SYR4 2013–2019
Lead
0.0020 mg/L 13%
of the EPA limit 0.0150 mg/L
15/15 LCR 2025
Bromodichloromethane
12.85 µg/L
No EPA limit set
worst single sample: 16 µg/L
11/11 SYR4 2013–2019
Chloroform
33.8 µg/L
No EPA limit set
worst single sample: 38.1 µg/L
11/11 SYR4 2013–2019
Dibromochloromethane
5.6 µg/L
No EPA limit set
worst single sample: 6.4 µg/L
11/11 SYR4 2013–2019
TTHM
51.1 µg/L 64%
of the EPA limit 80 µg/L
worst single sample: 62.1 µg/L
11/11 SYR4 2013–2019
Total Haloacetic Acids (HAA5)
11.755 µg/L 20%
of the EPA limit 60 µg/L
worst single sample: 14.6 µg/L
11/11 SYR4 2013–2019
Bromoform
1.57 µg/L
No EPA limit set
worst single sample: 1.6 µg/L
4/11 SYR4 2013–2019
Barium
128 µg/L 6.4%
of the EPA limit 2000 µg/L
worst single sample: 130 µg/L
3/3 SYR4 2012–2018
Dichloroacetic Acid
9.816 µg/L
No EPA limit set
worst single sample: 10.4 µg/L
3/3 SYR4 2018–2019
Trichloroacetic Acid
2.964 µg/L
No EPA limit set
worst single sample: 2.97 µg/L
3/3 SYR4 2018–2019
Chromium
10.555 µg/L 11%
of the EPA limit 100 µg/L
worst single sample: 11 µg/L
2/3 SYR4 2012–2018
Dibromoacetic Acid
1.7025 µg/L
No EPA limit set
worst single sample: 1.72 µg/L
2/3 SYR4 2018–2019
Selenium
10.72 µg/L 21%
of the EPA limit 50 µg/L
worst single sample: 11 µg/L
2/3 SYR4 2012–2018
Fluoride
120 µg/L 3%
of the EPA limit 4000 µg/L
1/3 SYR4 2012–2018
Lithium
10.5 µg/L
No EPA limit set
1/4 UCMR-5 2023
84 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,3,7,8-TCDD2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNetfosaaNfdhaNmefosaaNitriteOxamylPfdaPfdoaPfeesaPfhpsPFHXSPfmbaPfmpaPFNAPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
SUSAN DAVIDSON,
Phone
717-471-4580

Frequently asked questions about Akron Borough

Is Akron Borough tap water safe to drink?

EPA monitoring detected 25 contaminants in Akron Borough's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Akron Borough's water?

EPA monitoring detected Copper, Nitrate, Lead, Lead, Bromodichloromethane, and others. The full list with the level and data source for each is above.

How many people does Akron Borough serve?

Akron Borough reports serving 4,200 people in Pennsylvania, per its EPA record.

Has Akron Borough had any water quality violations?

The EPA has 60 violations on file for Akron Borough, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.