Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2010-10-01 → 2010-10-31 |
| TT | Health-based | Resolved | 2010-10-01 → 2010-10-31 |
| TT | Health-based | Resolved | 2010-10-01 → 2010-10-31 |
| TT | Health-based | Resolved | 2010-10-01 → 2010-10-31 |
| TT | Health-based | Resolved | 2010-01-01 → 2010-03-31 |
| TT | Health-based | Archived | 2009-10-01 → 2009-12-31 |
| TT | Health-based | Resolved | 2009-07-01 → 2009-09-30 |
| TT | Health-based | Resolved | 2009-04-01 → 2009-06-30 |
| TT | Health-based | Resolved | 2008-07-01 → 2008-09-30 |
| TT | Health-based | Resolved | 2008-07-01 → 2008-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 176.5 µg/L 14% of the EPA limit 1300 µg/L
worst single sample: 566.294 µg/L | 68/68 | SYR4 | 2013–2019 |
| Chloroform | 64.24 µg/L No EPA limit set
worst single sample: 97.1 µg/L | 65/65 | SYR4 | 2012–2019 |
| TTHM | 71.12 µg/L 89% of the EPA limit 80 µg/L
worst single sample: 105 µg/L | 65/65 | SYR4 | 2012–2019 |
| Bromodichloromethane | 7.5525 µg/L No EPA limit set
worst single sample: 7.8 µg/L | 60/65 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 44.35 µg/L 74% of the EPA limit 60 µg/L
worst single sample: 70.5 µg/L | 52/65 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.4725 µg/L No EPA limit set
worst single sample: 1.65 µg/L | 26/65 | SYR4 | 2012–2019 |
| Lead | 70.8 µg/L 472% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 640 µg/L | 25/68 | SYR4 | 2013–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2025 |
| Nitrate | 720 µg/L 7.2% of the EPA limit 10000 µg/L | 14/16 | SYR4 | 2012–2019 |
| Barium | 28 µg/L 1.4% of the EPA limit 2000 µg/L | 8/8 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 13.98 µg/L No EPA limit set
worst single sample: 14.3 µg/L | 5/10 | SYR4 | 2018–2019 |
| Trichloroacetic Acid | 14.82 µg/L No EPA limit set
worst single sample: 15.2 µg/L | 5/10 | SYR4 | 2018–2019 |
| Monochloroacetic Acid | 2.1 µg/L No EPA limit set | 1/10 | SYR4 | 2018–2019 |
| Selenium | 6.3 µg/L 13% of the EPA limit 50 µg/L | 1/8 | SYR4 | 2012–2019 |
96 contaminants tested, none detected
Utility contact
Frequently asked questions about Franklin System York Water
Is Franklin System York Water tap water safe to drink?
EPA monitoring detected 14 contaminants in Franklin System York Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Franklin System York Water's water?
EPA monitoring detected Copper, Chloroform, TTHM, Bromodichloromethane, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Franklin System York Water serve?
Franklin System York Water reports serving 4,400 people in Pennsylvania, per its EPA record.
Has Franklin System York Water had any water quality violations?
The EPA has 435 violations on file for Franklin System York Water, of which 36 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.