Tap WaterIndex

← Pennsylvania

Tap water quality report

Boro of Waynesboro

EPA monitoring tested this supplier for 110 contaminants and detected 16. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

110
contaminants tested
16
detected
13,200
people served
7
health-based violations
Pennsylvania rankingsLead in PennsylvaniaPFAS in Pennsylvania
Water source
Surface water
Ownership
Local government
Counties served
Franklin

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

7
health-based violations
501
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2014-07-01 → 2014-07-31
MCL Health-based Resolved 2014-07-01 → 2014-07-31
MCL Health-based Resolved 2014-07-01 → 2014-07-31
TT Health-based Resolved 2012-04-01 → 2012-06-30
TT Health-based Resolved 2012-04-01 → 2012-06-30
TT Health-based Resolved 2012-04-01 → 2012-06-30
TT Health-based Resolved 2003-11-01 → 2003-11-30
RPT Monitoring Resolved 2025-05-11
RPT Monitoring Resolved 2025-05-11
MR Monitoring Resolved 2024-03-01 → 2024-03-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Bromodichloromethane
7.0505 µg/L
No EPA limit set
worst single sample: 8.39 µg/L
122/128 SYR4 2012–2019
Chloroform
73.465 µg/L
No EPA limit set
worst single sample: 91.6 µg/L
122/128 SYR4 2012–2019
TTHM
80.795 µg/L 101%
of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 98.9 µg/L
122/128 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
52.15 µg/L 87%
of the EPA limit 60 µg/L
worst single sample: 66 µg/L
118/128 SYR4 2012–2019
Copper
137.5 µg/L 11%
of the EPA limit 1300 µg/L
worst single sample: 620 µg/L
94/94 SYR4 2013–2019
Lead
21.72 µg/L 145%
of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 160 µg/L
65/97 SYR4 2013–2019
Dichloroacetic Acid
22.15 µg/L
No EPA limit set
worst single sample: 25 µg/L
20/20 SYR4 2018–2019
Trichloroacetic Acid
47.25 µg/L
No EPA limit set
worst single sample: 52 µg/L
20/20 SYR4 2018–2019
Lead
0.0060 mg/L 40%
of the EPA limit 0.0150 mg/L
 16/16 LCR 2025
Nitrate
1220 µg/L 12%
of the EPA limit 10000 µg/L
 16/54 SYR4 2012–2019
Monochloroacetic Acid
1.655 µg/L
No EPA limit set
worst single sample: 1.7 µg/L
10/20 SYR4 2018–2019
Barium
153.85 µg/L 7.7%
of the EPA limit 2000 µg/L
worst single sample: 220 µg/L
8/12 SYR4 2012–2019
Dibromochloromethane
0.9100 µg/L
No EPA limit set
worst single sample: 0.9800 µg/L
8/128 SYR4 2012–2019
Fluoride
892.5 µg/L 22%
of the EPA limit 4000 µg/L
worst single sample: 959 µg/L
8/12 SYR4 2012–2019
Nitrite
846 µg/L 85%
of the EPA limit 1000 µg/L
worst single sample: 860 µg/L
2/27 SYR4 2012–2019
Di(2-ethylhexyl) Phthalate
0.6320 µg/L 11%
of the EPA limit 6 µg/L
 1/15 SYR4 2012–2019
94 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,3,7,8-TCDD2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDibromoacetic AcidDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
Tyler Grove
Phone
717-762-2101

Frequently asked questions about Boro of Waynesboro

Is Boro of Waynesboro tap water safe to drink?

EPA monitoring detected 16 contaminants in Boro of Waynesboro's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Boro of Waynesboro's water?

EPA monitoring detected Bromodichloromethane, Chloroform, TTHM, Total Haloacetic Acids (HAA5), Copper, and others. The full list with the level and data source for each is above.

How many people does Boro of Waynesboro serve?

Boro of Waynesboro reports serving 13,200 people in Pennsylvania, per its EPA record.

Has Boro of Waynesboro had any water quality violations?

The EPA has 501 violations on file for Boro of Waynesboro, of which 7 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.