Tap WaterIndex

← Oregon

Tap water quality report

Liberty Acres Mhp

EPA monitoring tested this supplier for 80 contaminants and detected 15. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

80
contaminants tested
15
detected
47
people served
4
health-based violations
Oregon rankingsLead in OregonPFAS in Oregon
Water source
Ground water
Ownership
Private
Counties served
Mercer

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

4
health-based violations
131
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2018-07-01 → 2018-07-31
TT Health-based Resolved 2018-07-01 → 2018-07-31
TT Health-based Resolved 2018-07-01 → 2018-07-31
TT Health-based Resolved 2018-07-01 → 2018-07-31
RPT Monitoring Resolved 2025-07-11
RPT Monitoring Resolved 2025-07-11
MR Monitoring Resolved 2016-10-01 → 2016-12-31
MR Monitoring Resolved 2016-10-01 → 2016-12-31
MR Monitoring Resolved 2016-10-01 → 2016-12-31
MR Monitoring Resolved 2016-10-01 → 2016-12-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
283 µg/L 22%
of the EPA limit 1300 µg/L
worst single sample: 315 µg/L
11/15 SYR4 2013–2019
Chloroform
5.635 µg/L
No EPA limit set
worst single sample: 6.1 µg/L
4/4 SYR4 2012–2019
Nitrate
190 µg/L 1.9%
of the EPA limit 10000 µg/L
 4/16 SYR4 2012–2019
Bromodichloromethane
2.72 µg/L
No EPA limit set
worst single sample: 2.8 µg/L
3/3 SYR4 2012–2019
Dibromochloromethane
1.99 µg/L
No EPA limit set
worst single sample: 2 µg/L
3/3 SYR4 2012–2019
Fluoride
298 µg/L 7.5%
of the EPA limit 4000 µg/L
worst single sample: 300 µg/L
3/3 SYR4 2012–2018
Lead
0.0080 mg/L 53%
of the EPA limit 0.0150 mg/L
 3/3 LCR 1996
TTHM
10.51 µg/L 13%
of the EPA limit 80 µg/L
worst single sample: 10.9 µg/L
3/3 SYR4 2012–2019
Arsenic
3.85 µg/L 39%
of the EPA limit 10 µg/L
worst single sample: 4 µg/L
2/3 SYR4 2012–2018
Dichloroacetic Acid
31.4 µg/L
No EPA limit set
worst single sample: 33 µg/L
2/3 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
57.05 µg/L 95%
of the EPA limit 60 µg/L
worst single sample: 60 µg/L
2/3 SYR4 2012–2019
Lead
15 µg/L 100%
of the EPA limit 15 µg/L
 1/15 SYR4 2013–2019
Monochloroacetic Acid
1 µg/L
No EPA limit set
 1/3 SYR4 2012–2019
Trichloroacetic Acid
26 µg/L
No EPA limit set
 1/3 SYR4 2012–2019
Xylenes, Total
1.24 µg/L 0%
of the EPA limit 10000 µg/L
 1/3 SYR4 2013–2019
65 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,3,7,8-TCDD2,4,5-TP2,4-DAntimony, TotalAsbestosAtrazineBhc-GammaBariumBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
PATRICK BAGAN
Phone
451-436-4161

Frequently asked questions about Liberty Acres Mhp

Is Liberty Acres Mhp tap water safe to drink?

EPA monitoring detected 15 contaminants in Liberty Acres Mhp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Liberty Acres Mhp's water?

EPA monitoring detected Copper, Chloroform, Nitrate, Bromodichloromethane, Dibromochloromethane, and others. The full list with the level and data source for each is above.

How many people does Liberty Acres Mhp serve?

Liberty Acres Mhp reports serving 47 people in Oregon, per its EPA record.

Has Liberty Acres Mhp had any water quality violations?

The EPA has 131 violations on file for Liberty Acres Mhp, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.