Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Unaddressed | 2026-01-11 |
| Other | Monitoring | Unaddressed | 2026-01-11 |
| Other | Monitoring | Unaddressed | 2026-01-11 |
| Other | Monitoring | Unaddressed | 2026-01-11 |
| Other | Monitoring | Unaddressed | 2026-01-11 |
| Other | Monitoring | Unaddressed | 2026-01-11 |
| Other | Monitoring | Unaddressed | 2026-01-11 |
| Other | Monitoring | Unaddressed | 2026-01-11 |
| Other | Monitoring | Unaddressed | 2026-01-11 |
| Other | Monitoring | Unaddressed | 2026-01-11 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Barium | 2780 µg/L 139% of the EPA limit, at the 95th percentile of samples — 2000 µg/L
worst single sample: 3400 µg/L | 53/54 | SYR4 | 2012–2019 |
| Copper | 355.32 µg/L 27% of the EPA limit 1300 µg/L
worst single sample: 405.5 µg/L | 30/30 | SYR4 | 2013–2019 |
| Bromodichloromethane | 4.4 µg/L No EPA limit set
worst single sample: 4.5 µg/L | 11/11 | SYR4 | 2012–2019 |
| Chloroform | 10.35 µg/L No EPA limit set
worst single sample: 11.3 µg/L | 11/11 | SYR4 | 2012–2019 |
| Dibromochloromethane | 3.1 µg/L No EPA limit set
worst single sample: 3.2 µg/L | 11/11 | SYR4 | 2012–2019 |
| TTHM | 16 µg/L 20% of the EPA limit 80 µg/L
worst single sample: 16.3 µg/L | 11/11 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 22.88 µg/L 38% of the EPA limit 60 µg/L
worst single sample: 23.6 µg/L | 10/11 | SYR4 | 2012–2019 |
| Nitrate | 1110 µg/L 11% of the EPA limit 10000 µg/L | 4/32 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 11.473 µg/L No EPA limit set
worst single sample: 12.1 µg/L | 3/3 | SYR4 | 2014–2019 |
| Lead | 0.0033 mg/L 22% of the EPA limit 0.0150 mg/L | 3/3 | LCR | 1996 |
| Bromoform | 1.295 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 2/11 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 7.4965 µg/L No EPA limit set
worst single sample: 7.67 µg/L | 2/3 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 3.8 µg/L No EPA limit set | 1/3 | SYR4 | 2014–2019 |
66 contaminants tested, none detected
Utility contact
Frequently asked questions about Summerville Boro Mun Auth
Is Summerville Boro Mun Auth tap water safe to drink?
EPA monitoring detected 13 contaminants in Summerville Boro Mun Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Summerville Boro Mun Auth's water?
EPA monitoring detected Barium, Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Summerville Boro Mun Auth serve?
Summerville Boro Mun Auth reports serving 700 people in Pennsylvania, per its EPA record.
Has Summerville Boro Mun Auth had any water quality violations?
The EPA has 399 violations on file for Summerville Boro Mun Auth, of which 0 are health-based (a contaminant limit or required treatment was breached) and 48 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.