Tap WaterIndex

← Pennsylvania

Tap water quality report

Latrobe Muni Auth

EPA monitoring tested this supplier for 108 contaminants and detected 12. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

108
contaminants tested
12
detected
30,000
people served
14
health-based violations
Pennsylvania rankingsLead in PennsylvaniaPFAS in Pennsylvania
Water source
Surface water
Ownership
Local government
Counties served
Westmoreland

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

14
health-based violations
237
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2023-11-06
TT Health-based Resolved 2023-11-06
TT Health-based Resolved 2023-11-06
TT Health-based Resolved 2023-11-06
TT Health-based Resolved 2022-08-07
TT Health-based Resolved 2022-08-07
TT Health-based Resolved 2022-08-07
TT Health-based Resolved 2022-08-07
TT Health-based Resolved 2009-04-01 → 2009-06-30
TT Health-based Resolved 2009-04-01 → 2009-06-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Chloroform
62.465 µg/L
No EPA limit set
worst single sample: 76.8 µg/L
104/104 SYR4 2012–2019
TTHM
70.57 µg/L 88%
of the EPA limit 80 µg/L
worst single sample: 81.5 µg/L
104/104 SYR4 2012–2019
Bromodichloromethane
8.03 µg/L
No EPA limit set
worst single sample: 10 µg/L
101/104 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
30.15 µg/L 50%
of the EPA limit 60 µg/L
worst single sample: 37.5 µg/L
91/104 SYR4 2012–2019
Trichloroacetic Acid
17.875 µg/L
No EPA limit set
worst single sample: 26.2 µg/L
82/96 SYR4 2014–2019
Dichloroacetic Acid
14.7 µg/L
No EPA limit set
worst single sample: 23.4 µg/L
81/96 SYR4 2014–2019
Copper
35.8 µg/L 2.8%
of the EPA limit 1300 µg/L
worst single sample: 44.8 µg/L
75/90 SYR4 2013–2019
Dibromochloromethane
1.0225 µg/L
No EPA limit set
worst single sample: 1.46 µg/L
32/104 SYR4 2012–2019
Lead
3.6625 µg/L 24%
of the EPA limit 15 µg/L
worst single sample: 7.51 µg/L
16/90 SYR4 2013–2019
Lead
0.0016 mg/L 11%
of the EPA limit 0.0150 mg/L
 13/13 LCR 2025
Barium
28.06 µg/L 1.4%
of the EPA limit 2000 µg/L
worst single sample: 28.2 µg/L
8/8 SYR4 2012–2019
Monochloroacetic Acid
4.5 µg/L
No EPA limit set
 1/96 SYR4 2014–2019
96 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,3,7,8-TCDD2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneFluorideGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidNetfosaaNfdhaNmefosaaNitrateNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
TERRI HAUSER
Phone
724-537-3378

Frequently asked questions about Latrobe Muni Auth

Is Latrobe Muni Auth tap water safe to drink?

EPA monitoring detected 12 contaminants in Latrobe Muni Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Latrobe Muni Auth's water?

EPA monitoring detected Chloroform, TTHM, Bromodichloromethane, Total Haloacetic Acids (HAA5), Trichloroacetic Acid, and others. The full list with the level and data source for each is above.

How many people does Latrobe Muni Auth serve?

Latrobe Muni Auth reports serving 30,000 people in Pennsylvania, per its EPA record.

Has Latrobe Muni Auth had any water quality violations?

The EPA has 237 violations on file for Latrobe Muni Auth, of which 14 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.